Here are our camshafts from Cat Cams for HONDA 1.6L 16v engine code D16A6
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for HONDA 1.6L 16v engine code D16A6
Sports profile :
-
Cat Cams camshaft reference: 2501108/S / Opening 0.1mm, intake 247°, exhaust 266° / Opening 1.0mm, intake 212°, exhaust 212° / Max lift intake 10.25mm, exhaust 9.65mm / Lift at TDC intake 1.10 mm, exhaust 1.10mm / Full opening inlet 110°, exhaust 110°.
The stock valve springs can handle high valve lift, but they are very weak and cannot exceed the stock RPM limit. For this reason, it is advisable to upgrade to Cat Cams springs. These camshafts do not have a fuel lobe. To use these camshafts in carbureted engines (like the D14A1), an electric fuel pump must be used. The distance between the valve and the piston must be at least 1.0 mm: - check 5-15° after TDC on intake - check 5-15° before TDC on exhaust. Machine the pistons if necessary. Improper installation can cause serious engine damage! ECU reprogramming required.
ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
