CAT CAMS camshaft for BMW 4 cylinder 8v 1.8L...
CAT CAMS camshaft for BMW 4 cylinder 8v 1.8L 105hp engine code M10B18

CAT CAMS camshaft for BMW 4 cylinder 8v 1.8L 105hp engine code M10B18

vgm13552
Made especially for you, available with a lead time of 3 to 6 weeks
€464.95
Tax included

Here are our camshafts from Cat Cams for BMW 4 cylinder 8v 1.8L 105hp engine code M10B18

Profil
Références

 Customer ratings and reviews
Nobody has posted a review yet
in this language
 

Here are our camshafts from Cat Cams for BMW 4 cylinder 8v 1.8L 105hp engine code M10B18

Description :

The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.

When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.

When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.

Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.

You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.

Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.

Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.

Without broaching the subject of driving pleasure which will increase your sensations tenfold.

Camshaft profile available for BMW 4 cylinder 8v 1.8L 105hp engine code M10B18

Sports profile :

  • Cat Cams camshaft reference: 1300142/N / Opening 0.1mm, intake 297°, exhaust 297° / Opening 1.0mm, intake 245°, exhaust 245° / Max lift intake 10.05mm, exhaust 10.05mm / Lift at TDC intake 2.15 mm, exhaust 2.15mm / Full opening inlet 110°, exhaust 110°.

Rally and circuit profile:

  • Cat Cams camshaft reference: 1300149/N /  Opening 0.1mm inlet 301°, exhaust 301° / Opening 1.0mm, inlet 258°, exhaust 258° / Max lift inlet 11.25mm, exhaust 11.25mm / Lift at TDC inlet 3.70mm, exhaust 3.70mm / Full opening inlet 110° exhaust 110°.

FOR COMPETITION REQUESTS ONLY. The following details should be checked: - The camshafts should turn smoothly in the cylinder head, ensuring free stroke by machining where necessary - The distance between the valve seal and the retainer at full lift should be d 'at least 0.6 mm - A minimum valve spring travel of 1.0 mm at full lift must be provided - distance between valve and piston 1.0 mm (preferably 1.5 mm). check 5-15° before TDC on the exhaust, and after TDC on the intake. ONLY for track applications and professional street use with engine management or adjustable carburetors.

  • Cat Cams camshaft reference: 1300148/N / Opening 0.1mm intake 311°, exhaust 305° / Opening 1.0mm intake 267°, exhaust 266° / Max lift intake 11.40mm, exhaust 11.45mm / Lift at TDC intake 4.25mm, exhaust 4.10mm / Full opening inlet 110°, exhaust 110°.

FOR COMPETITION REQUESTS ONLY. The following details should be checked: - The camshafts should turn smoothly in the cylinder head, ensuring free stroke by machining where necessary - The distance between the valve seal and the retainer at full lift should be d 'at least 0.6 mm - A minimum valve spring travel of 1.0 mm at full lift must be provided - distance between valve and piston 1.0 mm (preferably 1.5 mm). check 5-15° before TDC on the exhaust, and after TDC on the intake. For use ONLY in competition engines with independent engine management (throttle position sensor) or carburettors.

  • Cat Cams camshaft reference 1302146/N / Opening 0.1mm, intake 318°, exhaust 318° / Opening 1.0mm, intake 280°, exhaust 280° / Max lift intake 12.10mm, exhaust 12.10mm / Lift at TDC intake 5.15mm , exhaust 5.15mm / Full opening opening 104°, exhaust 104° Please note modifications to be expected: upper cup reference 99326, external spring reference PAC-E95009, internal springs reference PAC-I95009.

FOR COMPETITION REQUESTS ONLY. The following details should be checked: - The camshafts should turn smoothly in the cylinder head, ensuring free stroke by machining where necessary - The distance between the valve seal and the retainer at full lift should be d 'at least 0.6 mm - A minimum valve spring travel of 1.0 mm at full lift must be provided - distance between valve and piston 1.0 mm (preferably 1.5 mm). check 5-15° before TDC on the exhaust, and after TDC on the intake if necessary, machine the cylinder head and/or use solid shims to adjust the spring load. For use ONLY in competition engines with independent engine management (throttle position sensor) or carburettors.

Please use the correct part number code for your engine:

  • 13001xx : small bearing (42.95mm-41.95mm-34.95mm), right sprocket - 13002xx: small bearing (42.95mm-41.95mm-34.95mm), left sprocket
  • 13021xx : large bearing (44.95mm-43.95mm-34.95mm), right sprocket - 13022xx: large bearing (44.95mm-43.95mm-34.95mm), left sprocket

Difference between left and right gears:

/!\ ATTENTION /!\

The camshafts are custom-made parts.

Therefore, we will not carry out returns, exchanges or refunds in the event of an error.

To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.

High performance camshaft and pulley manufacturer

You might also like

Free Newsletter!

Subscribe to our newsletter to receive our news

Follow us :
Livraison rapide

24 à 48 h
Si produit en stock

RETOUR PRODUIT

POSSIBLE
Sous 14 jours

HOTLINE

EXPERT HOTLINE
à votre écoute

PAIEMENT Sécurisé

Monetico - CIC
Cofidis - Paypal

Product added to compare.