Here are our camshafts from Cat Cams for RENAULT Alpine A110 1600S R12 Gordini 1.3L
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for RENAULT Alpine A110 1600S R12 Gordini 1.3L:
Sports profile :
-
Cat Cams camshaft reference: 5500421/S / Opening 0.1mm, intake 286°, exhaust 269° / Opening 1.0mm, intake 244°, exhaust 227° / Max lift intake 10.45mm, exhaust 9.60mm / Lift at TDC intake 3.20mm, exhaust 2.25mm / Full opening intake 105°, exhaust 105° / Clearance, intake 0.40mm, exhaust 0.40mm Please note modifications to be expected: Valve springs and Cups.
Rally and circuit profile:
- Cat Cams camshaft reference: 5500422/S / Opening 0.1mm inlet 293°, exhaust 286° / Opening 1.0mm, inlet 250°, exhaust 244° / Max lift inlet 10.80mm, exhaust 10.45mm / Lift at TDC intake 3.65mm, exhaust 3.20mm / Full opening intake 105° exhaust 105° / Clearance, intake 0.40mm, exhaust 0.40mm Please note modifications to be expected: Valve springs and Cups.
- Cat Cams camshaft reference: 5500423/S / Opening 0.1mm intake 301°, exhaust 293° / Opening 1.0mm intake 258°, exhaust 250° / Max lift intake 11.20mm, exhaust 10.80mm / Lift at TDC intake 4.10mm, exhaust 3.65mm / Full opening intake 105°, exhaust 105° Clearance, intake 0.40mm, exhaust 0.40mm Please note modifications to be expected: Valve springs and cups.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
