Runner flap delete intake flaps removal kit for ALFA ROMEO 1.9 JTD Multijet 16V 150hp engine (939A200)

Here is our Dynaparts custom made aluminum avionics Dynaparts for ALFA ROMEO 1.9 JTD Multijet 16V 150hp engine (939A200)

This kit has been specially designed and developed to work with the new " Pierburg" intake manifold of the 1.9 JTD Multijet 16V 150hp (939A200) engines from ALFA ROMEO.

It will allow You to remove the 5 intake valves from its housing and therefore protect your engine from breakage.

WHEN and HOW to install our kit?

This kit installs as soon as you can, especially don't wait. Even a person new to mechanics can do it with tools, you just have to replace the old parts with this one.

Over time, the original intake flap valves become clogged, and consequently become heavier, which results in a breakage of the retention and fixing points of these flaps. If the breakage occurs with the engine running, the pieces fall directly into the engine, and the engine is broken and destroyed.

WHY install our kit?

For the reasons mentioned in the description above, and the main cause, avoid engine failure.

WHAT does our kit consist of?

The kit consists of 5 full body aluminum caps, turned on numerical control with the seals of the caps delivered fitted.

Make your choice from the menu above, Diameter 18.5mm or 15mm.

Glue tube included!

Advantages :

• preservation of the engine from a breakage
• optimal engine operation
• less clogging
• lower consumption
• extended service life
• decrease in scale

This kit is designed to be compatible with a reference manifold:

• Models for intake manifold with 18.5mm hole: 2.03462.03 / 55210201 or 93179055
  Models for intake manifold with 15mm hole: 2.03462.01 / 55206459 or 2.03462.00 / 55190238
  
  

Here are some examples of ALFA ROMEO compatible vehicles:

• ALFA ROMEO 1.9 JTD Multijet 16V 110kW / 150PS (939A200)