Pair of turbo TTE910 for ASTON MARTIN VANTAGE DB11 4.0 V8 M177

Introducing our High Performance TurboTTE910

Here is our pair of Turbo TTE910 which have been imagined and designed for ASTON MARTIN VANTAGE DB11 4.0 V8 M177

TTE proceeds to the dismantling of these turbos and they modify all the internal and external parts in order to make parts in CNC to be able to adapt in a PLUG&PLAY way. This turbo does not require any adapter or widening shims like other engines use.

This turbo is compatible for:

• ASTON MARTIN VANTAGE DB11 4.0 V8 M177

We offer you 2 possibilities:

1/ You buy new turbos and keep your original turbos
2/ You send us your original Turbos for modification / Upgrade by TTE

Attention : for choice number 2, due to the current context (cost of transport, cost of gasoline) we had to add additional shipping costs of 100 euros.

You also have the possibility to add a Heat Shield option on this turbo, for more information please contact us

/!\ ATTENTION /!\ IMPORTANT information when choosing a reconditioning of your TURBOS /!\ ATTENTION /!\

In the event that your choice is to recondition your turbo, it is your responsibility to send it to us by carrier of your choice to the address (which will be communicated to you after your purchase).

You will also have to take care to protect it well, because the goods travel under your responsibility.

Please do not send any accessories, oil lines, valves, hoses, parts or components other than the turbos and actuator, as we will not be responsible for any lost or broken parts.

Pack each turbo individually and extremely well to avoid damage in transit, double packing is recommended. We also recommend adding duplicate shipping labels to the outside of your package and placing one inside to ensure your package does not get lost.

We recommend that you only use DHL, DPD, UPS, TNT, FEDEX carriers.

Once you send your turbo(s) to STR PERFORMANCE, they will be fully checked and validated if they can be upgraded within 2 weeks. Once approved for an upgrade, they will proceed with the process. If for some reason they cannot upgrade your turbocharger(s), for example damaged. We will contact you.

Please also note that during the inspection by TheTurboEngineers  If your turbo(s) is/are damaged or has faults that do not allow it to be reconditioned,inspection costs worth 150 euros will be invoiced to you in the form of a temporary product sheet before the return of your equipment.

These fees allow TheTurboEngineers to inspect and validate if the turbo is in reasonable condition to be upgraded. If the turbo is free of damage and defects, the upgrade will continue and you will not be charged these fees.

If the turbo is damaged or has defects that do not allow the turbocharger to be upgraded, an inspection fee will be charged, a deduction from the refund of the original purchase will be made and the turbocharger will be returned to the delivery address of origin. No shipping costs will be refunded.

Design andimprovement

TheTurboEngineers has put its know-how into the construction of these new TTE910 turbos for ASTON MARTIN VANTAGE DB11 4.0 V8 M177

Several modifications have been made such as the change of the original turbo wheel and the use of a much larger and more efficient CNC wheel. A widening of the compressor casing has been carried out in order to correspond to the new profile of the latter.
Also TTE has been able to optimize the efficiency of the turbo by also carrying out the replacement of the standard bearings for the sport bearing pack TTE, As well as a change of exhaust wheel to a wheel with 9 blades, thus being larger, this wheel will allow by its design, an increased increase in the volume of air, will make it possible to lower the EGT and therefore a better turbo response

Balancing
 
Precise Balancing of ALL TURBOS TTE is a critical key factor. We strive to maintain a level of balance higher than those of manufactures in order to obtain a much more durable longevity which results in increased performance. A good balance also improves the acoustics.

First the parts are balanced at slow speeds up to 2800rpm with several bearings using our specific machines, then the components are assembled and then the CHRA are dynamically balanced, but this time according to our application at up to 250,000 rpm with several stages using our in-house VSR machine to obtain the perfect balance.
Our balances are much rigorous and higher than OEM standards. Each turbocharger comes with the balance test result document and specific serial number.
 
Strong points :

• Original BorgWarner turbocharger as base part
• TTE CNC compressor wheel 7+7 blade
• High flow turbine
• Capacity of 900hp and +
• Plug&play assembly
• Finely balanced individual parts then assembly with our central high speed VSR high velocity machine
• Balancing test and results provided specific to each turbo with a serial number
• Designed, machined and assembled by TTE in Germany
• Price shown is for one PAIR turbochargers

For atranquilityOfmind,TTE has a one year warranty on all its turbos.

Whetheryour turbocharger fails or encounters amalfunction, reconditioning or replacement is possible.

However, this warranty extends only to the original owner,does not cover labor, misuse, faulty installation and failure of related parts.

All items are warranted to be free from defects in materials and workmanship prior to installation

It is therefore your responsibility to ensure that the product purchased is fitted correctly by an experienced professional and for the use for which it is intended, while using the correct associated equipment.

Failure to follow these guidelines will void any warranty.

The return will nevertheless be at your expense.

Each manufacturer can provide different lead times and guarantees for its products. Do not hesitate to contact us for more information.