Product details:
When using the car on the track, the rear anti-roll bar plays an important role in the handling of your car. It is connected to the wishbones by stabilizer bars / anti-roll bars. These links with OEM parts and rubber tend to become soft and worn, limiting the work of the stabilizer bar.
For this reason, we have developed an adjustable rear stabilizer bar link kit that uses metal-to-metal uniball and spherical ball joints, similar to high-end vehicles like Porsche RS (GT2RS, GT3RS) to avoid roll effects. in the bends. They are also adjustable in length so you can adjust them for the configuration of your car according to the weight etc. We tested them extensively on our track AUDI TTRS Track Day.
Product features:
- - Adjustable in length so you can adjust your vehicle in relation to the weight and therefore askew if necessary
- - No rubber bend, you won't lose the defined geometry when you do your alignment
Characteristics :
- - CNC machined part in 7075 aluminum and black anodized
- - M12x1.25 racing bits have proven their worth on our racing kits and particularly on our Mitsubishi Lancer EVO.
- - No Made In China
- - Galvanized metal rings in black
- - Uniball ball head in M12 Fluro
- - Screw in 10.9
- - Rubber end caps to protect the M12 end caps
What's included:
- - 1 Set of adjustable rear stabilizer bar links with screws from VERKLINE
Compatible with :
- Audi A6 S6 RS6 C6
This Kit Replaces:
- - 8A0505465D / 8A0 505 465D
- - 8A0505466D / 8A0 505 466D
- - 8D0505465 / 8D0 505 465
- - 8D0505466 / 8D0 505 466
STR Performance is official distributor of VERKLINE products, if you are looking for a part from VERKLINE that we do not have on our site, do not hesitate to contact us via our Contact page, so that we can give you a price and a deadline .
The cars have been passionate about us for more than 10 years and more particularly the masterpieces Audi Quattro.
During this period, we built the legendary cars for us and ourselves. Passionate about our work and obsessed with the concern of detail, we started producing pieces for us and for our friends a few years ago.
It is only by making car parts ourselves that we can meet the highest standards! He has evolved over the years and has become our main work at VERKLINE.com formerly AKmotorsport.net
We design and test the products in our warehouse. When ready, they are sent to our manufacturing department, use machines, the parts are made in the desired tolerances. After that, we perform the final assembly and quality control.
All parts are designed in 3D CAD and produced on our machines to ensure superior quality and repeatability.
Internal CNC machines:
