Here is our EGR Valve Removal Kit for Audi A4 A6 equipped with a 2.0 TDI engine engine code BVA BVF BVG BLB
This kit has been specially designed and developed for 2.0 TDI diesel engines engine code BVA BVF BVG BLB. It will allow you to remove your EGR valve by this kit.
This part is made of seamless Teflon and is manufactured IN FRANCE.
It will fit perfectly in place while following the instructions included in this kit. It will allow you to preserve your engine from breakage and fouling.
/!\ ATTENTION /!\
Typically, up to 2002-2004, no ECU ENGINE light is displayed. On later models with pneumatic and electronic EGR valves, fitting this part may cause the ECU warning light to appear. We recommend reprogramming the ECU in order to completely remove the EGR function, this can be done by a reprogramming company.
No recovery of the equipment will be possible, engine light on or not!
WHY install our kit?
for the reasons mentioned in the description below, and the main cause, to avoid engine breakage and fouling.
WHEN and HOW to install our kit?
This kit can be installed as soon as you can, especially do not wait. Even a novice in mechanics can do it with tools, you just have to replace your EGR valve with this one.
Over time, the EGR valves become clogged and therefore reduce the internal diameter of the air flows, which results in a loss of power and poor gas regeneration.
The EGR valve is an engine element that allows part of the exhaust gases to be recycled into the intake. They are burned a second time.
This technique clogs the intake manifold and causes engine problems.
The EGR valve removal kits or plates sold on https://strperformance.com/en/ will allow you to plug, block and remove the EGR valves. You will thus be able to reduce or eliminate any problem, in a curative and preventive way.
Our products are designed and developed on the vehicle valves directly and are fixed without major modification. In order to make your choice or in case of hesitation, compare the photos of our kits with your EGR valve mounted on your vehicle, or refer to the list of compatible engines below.
This kit was designed to be practical, it is mounted in place of the mechanical part of your EGR valve. You must remove the electrical part, then put this cap.
Compatible kit for:
- Audi A4 (8EC, B7) (11.2005 - 11.2006) 2.0 TDI, 126HP / 93kW, BVF engine
- Audi A4 (8EC, B7) (06.2006 - 06.2008) 2.0 TDI, 163HP / 120kW, BVA engine
- Audi A4 (8EC, B7) (09.2005 - 09.2006) 2.0 TDI, 121 HP / 89 kW, BVG engine
- Audi A4 (8EC, B7) (06.2006 - 06.2008) 2.0 TDI, 170 HP / 125 kW, BRD engine
- Audi A4 (8EC, B7) (08.2004 - 06.2008) 2.0 TDI, 136 HP / 100 kW, BNA engine
- Audi A4 (8EC, B7) (08.2004 - 06.2008) 2.0 TDI, 140 HP / 103 kW, BLB engine
- Audi A4 quattro (8EC, B7) (06.2006 - 06.2008) 2.0 TDI, 163 HP / 120 kW, BVA engine
- Audi A4 quattro (8EC, B7) (06.2006 - 06.2008) 2.0 TDI, 170 HP / 125 kW, BRD engine
- Audi A4 (8K2, B8) (06.2008 - 03.2012) 2.0 TDI, 120 HP / 88 kW, CAGC engine
- Audi A4 (8K2, B8) (08.2008 - 03.2012) 2.0 TDI, 170 HP / 125 kW, CAHA engine
- Audi A4 Avant (8ED, B7) (11.2005 - 11.2006) 2.0 TDI, 126HP / 93kW, BVF engine
- Audi A4 Avant (8ED, B7) (06.2006 - 06.2008) 2.0 TDI, 163HP / 120kW, BVA engine
- Audi A4 Avant (8ED, B7) (01.2006 - 09.2006) 2.0 TDI, 121HP / 89kW, BVG engine
- Audi A4 Avant (8ED, B7) (08.2004 - 06.2008) 2.0 TDI, 136 HP / 100 kW, BNA engine
- Audi A4 Avant (8ED, B7) (06.2006 - 06.2008) 2.0 TDI, 170 HP / 125 kW, BRD engine
- Audi A4 Avant (8ED, B7) (08.2004 - 06.2008) 2.0 TDI, 140 HP / 103 kW, BLB engine
- Audi A4 Avant quattro (8ED, B7) (06.2006 - 06.2008) 2.0 TDI, 163HP / 120kW, BVA engine
- Audi A4 Avant quattro (8ED, B7) (06.2006 - 06.2008) 2.0 TDI, 170 HP / 125 kW, BRD engine
- Audi A4 Avant (8K5, B8) (06.2008 - 12.2011) 2.0 TDI, 120 HP / 88 kW, CAGC engine
- Audi A4 Avant (8K5, B8) (08.2008 - 03.2012) 2.0 TDI, 170 HP / 125 kW, CAHA engine
- Audi A6 (4F2, C6) (09.2005 - 06.2006) 2.0 TDI, 121HP / 89kW, BVG engine
- Audi A6 (4F2, C6) (07.2004 - 03.2011) 2.0 TDI, 136 HP / 100 kW, BNA engine
- Audi A6 (4F2, C6) (07.2004 - 10.2008) 2.0 TDI, 140 HP / 103 kW, BLB engine
- Audi A6 Avant (4F5, C6) (09.2005 - 06.2006) 2.0 TDI, 121HP / 89kW, BVG engine
- Audi A6 Avant (4F5, C6) (07.2004 - 03.2011) 2.0 TDI, 136 HP / 100 kW, BNA engine
- Audi A6 Avant (4F5, C6) (07.2004 - 10.2008) 2.0 TDI, 140 HP / 103 kW, BRE engine
If in doubt, please check your engine code. If your engine or vehicle model is not listed, please contact us before ordering.
EGR Valve OEM Numbers:
- 03G131501R
- 03G131501B
- 03G131501J
- 03G131501Q
