CAT CAMS camshaft for FORD 4 cylinders 16v engine code BH20
Here are our camshafts from Cat Cams for FORD 4 cylinders 16v engine code BH20
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for FORD 4 cylinders 16v engine code BH20
Sports profile :
-
Cat Cams camshaft reference: 2280602/C / Opening 0.1mm, intake 258°, exhaust 258° / Opening 1.0mm, intake 230°, exhaust 230° / Max lift intake 10.65mm, exhaust 10.65mm / Lift at TDC intake 1.30 mm, exhaust 1.30mm / Full opening inlet 112°, exhaust 112° Hydraulic tappets.
- Cat Cams camshaft reference: 2280603/C / Opening 0.1mm, intake 260°, exhaust 258° / Opening 1.0mm, intake 233°, exhaust 230° / Max lift intake 10.90mm, exhaust 10.65mm / Lift at TDC intake 1.80 mm, exhaust 1.55mm / Full opening inlet 110°, exhaust 110° Hydraulic pusher .
ONLY for track applications and professional street use with engine management or adjustable carburetors.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
High performance camshaft and pulley manufacturer
You might also like