CAT CAMS camshaft for HONDA 1.6L 16v engine code B16A
CAT CAMS camshaft for HONDA 1.6L 16v engine code B16A

CAT CAMS camshaft for HONDA 1.6L 16v engine code B16A

Here are our camshafts from Cat Cams for HONDA 1.6L 16v engine code B16A

Profile
References
vgm11953
€1,184.95
Made especially for you, available with a lead time of 3 to 6 weeks

 

Here are our camshafts from Cat Cams for HONDA 1.6L 16v engine code B16A

Description :

The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.

When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.

When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.

Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.

You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.

Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.

Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.

Without broaching the subject of driving pleasure which will increase your sensations tenfold.

Camshaft profile available for HONDA 1.6L 16v engine code B16A

Sports profile :

  • Cat Cams camshaft reference: 2501613/S / Opening 0.1mm, intake 264°, exhaust 259° / Opening 1.0mm, intake 234°, exhaust 230° / Max lift intake 11.00mm, exhaust 9.95mm / Lift at TDC intake 4.05 mm, exhaust 3.10mm / Full opening inlet 96°, exhaust 100°.

Any warranty regarding camshaft wear is excluded unless the rocker arms have been reconditioned by Cat Cams .

  • Cat Cams camshaft reference: 2501614/S / Opening 0.1mm, intake 268°, exhaust 263° / Opening 1.0mm, intake 238°, exhaust 234° / Max lift intake 11.00mm, exhaust 9.95mm / Lift at TDC intake 4.30 mm, exhaust 3.40mm / Full opening inlet 96°, exhaust 100°.

Rally and circuit profile:

  • Cat Cams camshaft reference 5504403/S / Opening 0.1mm, intake 278°, exhaust 269°/Opening 1.0mm, intake 242°, exhaust 234°/Max lift intake 5.85mm, exhaust 5.45mm /Lift at TDC intake 0.05mm, exhaust 1.75mm / Full opening intake 140°, exhaust 110°.

ONLY for track applications and professional street use with engine management or adjustable carburetors. The VVT ​​system on the intake camshaft permanently modifies the cam timing (and therefore the lift at TDC): - 1st intake valve: 140° (disengaged) // 97° (engaged) - 2nd intake valve: 144° (disengaged) // 101° (engaged) - 1st exhaust valve: 110° (no VVT) - 2nd exhaust valve: 106° (no VVT) Axles are identical to the original camshafts. Please make sure there is enough distance between the valve and the piston when the VVT ​​system is engaged.

  • Cat Cams camshaft reference 5504405/S / Opening 0.1mm, intake 293°, exhaust 285°/Opening 1.0mm, intake 258°, exhaust 251°/Max lift intake 11.95mm, exhaust 11.70mm /Lift at TDC intake 0.30mm, exhaust 2.75mm / Full opening intake 140°, exhaust 110°. Please note modifications to be planned : External valve springs reference PAC-E99862

ONLY for track applications and professional street use with engine management or adjustable carburetors. The VVT ​​system on the intake camshaft permanently modifies the cam timing (and therefore the lift at TDC): - 1st intake valve: 140° (disengaged) // 97° (engaged) - 2nd intake valve: 144° (disengaged) // 101° (engaged) - 1st exhaust valve: 110° (no VVT) - 2nd exhaust valve: 106° (no VVT) Axles are identical to the original camshafts. Please make sure there is enough distance between the valve and the piston when the VVT ​​system is engaged.

  • Cat Cams camshaft reference 5504406/S / Opening 0.1mm, intake 300°, exhaust 293°/Opening 1.0mm, intake 266°, exhaust 258°/Max lift intake 12.20mm, exhaust 11.95mm /Lift at TDC intake 0.50mm, exhaust 3.35mm / Full opening intake 140°, exhaust 110°. Please note modifications to be planned : External valve springs reference PAC-E99862

ONLY for track applications and professional street use with engine management or adjustable carburetors. The VVT ​​system on the intake camshaft permanently modifies the cam timing (and therefore the lift at TDC): - 1st intake valve: 140° (disengaged) // 97° (engaged) - 2nd intake valve: 144° (disengaged) // 101° (engaged) - 1st exhaust valve: 110° (no VVT) - 2nd exhaust valve: 106° (no VVT) Axles are identical to the original camshafts. Please make sure there is enough distance between the valve and the piston when the VVT ​​system is engaged.

ATTENTION /!\

The camshafts are custom-made parts.

Therefore, we will not carry out returns, exchanges or refunds in the event of an error.

To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.

No reviews

You might also like

6 other products in the same category:

Product return

Product return within 14 days with conditions*

Tracked Delivery

Track your order in real time with Colissimo, UPS FEDEX TNT Chronopost DPD GEODIS

HOTLINE online

Our experts are at your disposal by email or telephone

100% secure payment

Bank card payments via CIC Monetico, COFIDIS or PAYPAL in 4 installments free of charge

FAQ: The Most Frequently Asked Questions
How do I track my package?
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
How to contact Customer Service?
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Which countries do you deliver to?
Toggle Content
What are the shipping times?
Toggle Content
How much are the shipping costs?
Toggle Content