Here are our camshafts from Cat Cams for HONDA 1.6L 16v 129hp engine code D16A9/Z5
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for HONDA 1.6L 16v 129hp engine code D16A9/Z5
Rally and circuit profile:
-
Cat Cams camshaft reference 2500415/S / Opening 0.1mm, intake 314°, exhaust 314°/Opening 1.0mm, intake 244°, exhaust 244°/Max lift intake 10.85mm, exhaust 10.85mm /Lift at TDC intake 2.95mm, exhaust 2.95mm / Full opening intake 106°, exhaust 106°. Please note that modifications are required : upper cup reference 99412, lower cup reference 99538/O, external spring reference PAC-S90015.
Check that the distance between the valve seal and the retainer is at least 0.6 mm at full lift. Use “GOLD Grade” springs for applications above 12.5mm valve lift / 8,500 rpm. we can repair the rocker arms if the wear is not excessive engine with rocker arms. ONLY for track applications and professional street use with engine management or adjustable carburetors.
ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
