Here are our camshafts from Cat Cams for MERCEDES 4 cylinders 2.0L 8v engine code M102.962
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for MERCEDES 4 cylinders 2.0L 8v engine code M102.962
Sports profile :
-
Cat Cams camshaft reference: 4000341/S / Opening 0.1mm, intake 284°, exhaust 278° / Opening 1.0mm, intake 238°, exhaust 230° / Max lift intake 11.50mm, exhaust 11.00mm / Lift at TDC intake 2.60 mm, exhaust 2.10mm / Full opening inlet 108°, exhaust 108°. Please note modifications to be expected : Exterior valve springs reference PAC-E12009, interior reference PAC-I12009, Pushers reference CC007, Cups reference 99310.
Billet steel camshafts, front bearing/gear assembly not available - camshafts also fit 2.5L engines. ECU reprogramming required, valve seals need to be lowered. The distance between the valve seal and the retainer should be at least 0.6mm at full lift.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
