Here are our camshafts from Cat Cams for PEUGEOT 205 309 and CITROEN 1.9L 8V
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for PEUGEOT 205 309 and CITROEN 1.9L 8V:
Sports profile :
-
Cat Cams camshaft reference: 4900365/C / Opening 0.1mm, intake 268°, exhaust 268° / Opening 1.0mm, intake 234°, exhaust 234° / Max lift intake 11.75mm, exhaust 11.75mm / Lift at TDC inlet 2.15mm, exhaust 2.15mm / Full opening inlet 110°, exhaust 110° / Inlet clearance 0.30, exhaust 0.30.
Turbo profile:
- Cat Cams camshaft reference: 4900360/C / Opening 0.1mm, intake 276°, exhaust 274° / Opening 1.0mm, intake 235°, exhaust 238° / Max lift intake 12.25mm, exhaust 11.60mm / Lift at TDC inlet 1.85mm, exhaust 1.85mm / Full opening inlet 112°, exhaust 114° / Intake clearance 0.20, exhaust 0.30
Rally and circuit profile:
- Cat Cams camshaft reference: 4900366/C / Opening 0.1mm inlet 295°, exhaust 295° / Opening 1.0mm, inlet 250°, exhaust 250° / Max lift inlet 12.00mm, exhaust 12.00mm / Lift at TDC intake 3.15mm, exhaust 3.10mm / Full opening inlet 110° exhaust 110° / Inlet clearance 0.30, exhaust 0.30.
- Cat Cams camshaft reference: 4900367/C / Opening 0.1mm intake 286°, exhaust 278° / Opening 1.0mm intake 254°, exhaust 254° / Max lift intake 12.10mm, exhaust 12.10mm / Lift at TDC intake 3 .55mm, exhaust 3.60mm / Full intake opening 108°, exhaust 108° Please note modifications to be expected: Valve springs reference PAC-D99859, Cups reference 99331 ( modification of the cylinder head on the 2L engine ) / Intake clearance 108°, exhaust 0.25
- Cat Cams camshaft reference 4900373/C / Opening 0.1mm, intake 294°, exhaust 294° / Opening 1.0mm, intake 254°, exhaust 254° / Max lift intake 12.10mm, exhaust 12.10mm / Lift at TDC intake 3.80mm, exhaust 3.85mm / Full intake opening 106°, exhaust 106° Please note modifications to be expected: Valve springs reference PAC-D99859, Cups reference 99331 ( modification of the cylinder head on the 2L engine ) / Intake clearance 0, 25, exhaust 0.25
- Cat Cams camshaft reference 4900368/C Opening 0.1mm intake 298°, exhaust 298° / Opening 1.0mm intake 260°, exhaust 260° / Max lift intake 12.50mm exhaust 12.50mm / Lift at TDC intake 4.30mm, exhaust 4.25mm / Full intake opening 106°, exhaust 106° Please note modifications to be expected: Valve springs reference PAC-D99859, Cups reference 99331 ( modification of the cylinder head on the 2L engine ) / Intake clearance 0.20, exhaust 0 .20
- Cat Cams camshaft reference: 4900361/C / intake 303°, exhaust 303° / Opening 1.0mm, intake 272°, exhaust 272° / Max lift intake 12.70mm, exhaust 12.70mm / Lift at TDC intake 5.25mm , exhaust 5.05mm / Full intake opening 105°, exhaust 105° Please note modifications to be expected: Valve springs reference PAC-D99859, Cups reference 99331 ( modification of the cylinder head on the 2L engine ) / Intake clearance 0.25, exhaust 0.20
- Cat Cams camshaft reference 4900372/C / Opening 0.1mm intake 308°, exhaust 308° / Opening 1.0mm, intake 270°, exhaust 270° / Max lift intake 14.45mm, exhaust 14.45mm / Lift at TDC: intake 5.60mm, exhaust 5.50mm / Full intake opening 104°, exhaust 104° Please note modifications to be expected: Valve springs reference PAC-D99859, Cups reference 99331 ( modification of the cylinder head on the 2L engine ) / Intake clearance 0.25, exhaust 0.20
- Cat Cams camshaft reference 4900375/C / Opening 0.1mm intake 305°, exhaust 305° / Opening 1.0mm intake 260°, exhaust 260° / Lift at max intake 13.00mm, exhaust 13.00mm / Lift at TDC intake 4 .40mm, exhaust 4.40mm / Full opening inlet 106°, exhaust 106° Please note modifications to be expected: Valve springs reference PAC-D99859, Cups reference 99331 ( modification of the cylinder head on the 2L engine ) / Intake clearance 0.25, exhaust 0.25
- Cat Cams camshaft reference 4900369/C / Opening 0.1mm: intake 307°, exhaust 307° / Opening 1.0mm intake 268°, exhaust 268° / Max lift intake 13.00mm, exhaust 13.00mm / Lift at TDC intake 5, 10mm exhaust 5.05mm full opening inlet 104° exhaust 104°. Please note modifications to be expected: Valve springs reference PAC-D99859, Cups reference 99331 ( modification of the cylinder head on the 2L engine ) / Intake clearance 0.20, exhaust 0.20
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
