EGR valve removal cap kit for RENAULT Kangoo 1.9D 65hp (KC0E, KC02, KC0J, KC0N)

Here is our Dynaparts EGR valve removal cap for RENAULT Kangoo 1.9D 65cv (KC0E, KC02, KC0J, KC0N)

This kit has been specially designed and developed for 1.9D and 1.9 DCi diesel engines from RENAULT. It will allow you to remove your EGR valve by this kit.

This part is made of seamless aluminum and is made IN FRANCE.

It will be mounted perfectly in place while following the instructions included in this kit. It will allow you to protect your engine from breakage and clogging.

French made !

WHY install our kit?

for the reasons given in the description below, and the main cause, avoid engine breakage and clogging.

WHEN and HOW to install our kit?

This kit installs as soon as you can, especially don't wait. Even a person new to mechanics can with tools, do it, you just have to replace your EGR valve with this one.

Over time the EGR valves become clogged and consequently reduce the internal diameter of the air flows, which results in a loss of power, poor gas regeneration.

The EGR valve is a driving element which recycles part of the exhaust gases into the intake. They are burned a second time.

This technique clogs the intake manifold and causes engine problems.

The EGR valve removal kits or plates sold on https://strperformance.com/en/ will allow you to plug, seal and remove EGR valves. You will be able to reduce or eliminate any problem, in a curative and preventive way.

Our products are designed and developed on vehicle valves directly and are attached without significant modification. In order to make your choice or in case of hesitation, compare the photos of our kits with your EGR valve mounted on your vehicle, or refer to the list of compatible engines below.

This kit has been designed to be practical, it is mounted in place of the mechanical part of your EGR valve. You have to remove the electrical part, then put this plug.

Then you can put the electrical part back on, leaving it plugged in (if desired). The assembly is invisible!

Monoblock design, seamless. French made !

Example of compatible EGR valves:

• RENAULT: 77 00 107 797
• RENAULT: 82 00 229 190
• RENAULT: 82 00 231 630
• RENAULT: 82 00 282 880
• RENAULT: 82 00 360 200
• RENAULT: 82 00 467 001
• RENAULT: 82 00 542 997
• RENAULT: 82 00 157 971
• RENAULT: 82 00 282 879
• RENAULT: 82 00 293 950
• RENAULT: 82 00 360 201
• RENAULT: 82 00 467 030
• RENAULT: 82 00 542 998

Example of compatible vehicles:

• RENAULT Kangoo 1.9D 65cv (KC0E, KC02, KC0J, KC0N)