Product details:
After a long CAD development based on the 3D scan of the OEM engine cradle, tested with the CAD FEA method (finite element method) and on the road, you can now buy a cradle for the front of your TOYOTA Yaris GR.
We use the same T45 tubing as in WRC cars, our wishbones provide increased stiffness and extra adjustability. All factory parts are bolted to this unit, no other modifications are necessary.
"T45" tubing is a very unique seamless carbon base steel tubing that has been used in many applications across different industries. It is stronger than the Co-Mo 4130 tube also used in motorsport.
It is widely used in the aerospace industry and in equipment such as pilot seats and crew seats due to the materials ability to withstand high G-forces without cracking or splitting.
This material is carbon and manganese based and conforms to aerospace specifications as defined by British Standards.
Properties
Tensile: 700 - 900MPa,
0.2% Yield 620MPa minimum
Hardness test: 201min - 262 max HB or 210min - 275max HV
Advantages :
- Additional (revised) suspension mounting points (wishbones, steering rack, anti-roll bar) for improved suspension kinematics for cars lowered for racing purposes.
- A subframe mounting position eliminates shifting of the subframe under the car. No need for subframe locking kit/dead collar kit (saving weight).
- Increases chassis rigidity for better handling. No need for additional bar/lower limb reinforcement (weight saving).
- Better access to the underbody of the car.
Characteristics :
- - Better accessibility under the car allowing the triangle to be changed without any other dismantling constraints
- - T45 tubes (BS4T45 to BS4T100) imported from UK and S355 metal sheets
- - All components TIG welded
- - Delivered painted (Epoxy powder coating) black
- - Can be used with OEM wishbones
- - Plug&Play assembly
- - Compatible with OEM and Verkline wishbones
What's included:
- Front engine cradle Supplied painted black epoxy or on special order
- Support set to modify the kinematics (triangles, steering rack, anti-roll bar)
- Mounting bolt set
- Custom air duct
- Printed installation instructions
Compatible with :
Note: Sold for off-road, race track and racing applications only. Installing these type of parts will cause noise and other vibrations in your vehicle. We strongly advise that you have the crib fitted at a qualified and experienced workshop who will know what to do.
This piece is custom-made to order so when you order this product and we are launching production there will NEVER be taken exchanged refunded, thank you to take NOTE
STR Performance is an official distributor of VERKLINE products, if you are looking for a part from VERKLINE that we do not have on our site, do not hesitate to contact us via our Contact page, so that we can give you a price and a deadline. .
