JXB Performance Reinforced Driveshaft Bearing for Audi A6 S6 RS6 A7 S7 RS7 C8 from 2018

Here is our reinforced driveshaft bearing from JXB Performance for Audi A6 S6 RS6 A7 S7 RS7 C8 from 2018

What's wrong with a worn or torn driveshaft bearing?

The stock driveshaft center support bearing is designed to reduce NVH in the vehicle by holding the center bearing loosely with rubber enclaves that are quite fragile. During starts and gear changes, the driveshaft can become off-center, decreasing throttle response and causing oscillations in the transmission.
As it ages, the rubber in the mount sags and dry rots, ruining the alignment of the driveshaft.

What is the solution offered by JXB Performance ?

Their concept in this part is the idea of improving the maintenance of the drive shaft firmly in place at all times, thus with its solid construction guarantees that it will never wear out.
Thick CNC aluminum half moons ensure that the driveshaft cannot move from center, thus maintaining driveshaft alignment at all times. Isolation silent blocks separate the supporting frame from the body, thus minimizing NVH noise transmission.

Our reinforcements are sold with a street road version, therefore 65% hardness, we have the possibility of providing more rigid ones for street or racing driving, in extreme conditions (drift, rally, or other type), contact us for this particular request.

Installation does not require removal of the driveshaft. The 2-piece design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.

JXB Performance provides the sale of spare parts if necessary to remake this part.

Here is a video explaining the installation: