VERKLINE reinforced front lightened subframe 6.5Kg For Volkswagen Golf Mk7 Mk8 GTi R TCR Clubsport MQB platform

Product details:

After a long CAD development based on the 3D scan of the OEM engine cradle, tested with the CAD FEA method (finite element method) and on the road, you can now buy a cradle for the front of your Audi TT TS TTRs 8J cars. List of cars below.

We use the same T45 tubing as in WRC cars, our wishbones provide increased stiffness and extra adjustability. All factory parts are bolted to this unit, no other modifications are necessary.

"T45" tubing is a very unique seamless carbon base steel tubing that has been used in many applications across different industries. It is stronger than the Co-Mo 4130 tube also used in motorsport.

It is widely used in the aerospace industry and in equipment such as pilot seats and crew seats due to the materials ability to withstand high G-forces without cracking or splitting.

This material is carbon and manganese based and conforms to aerospace specifications as defined by British Standards.

This cradle is compatible for LHD (left-hand drive) and RHD (right-hand drive) vehicles.

Attention 1: If you are using standard OEM metal wishbones and your car is significantly lowered, it may be necessary to shim approximately 2mm of the wishbones over a 10mm length. There is no need to shim anything with OEM aluminum wishbones or when using Verkline front lower control arms.

Attention 2: The cradle does not work with Whiteline and SuperPro front lower control arms. They are wider than the OEM arms and cannot be used with this cradle.

Properties
Tensile: 700 - 900MPa,
0.2% Yield 620MPa minimum
Hardness test: 201min - 262 max HB or 210min - 275max HV

Advantages :

• - Can be used with your OEM wishbones or lowered and adjustable tubular front wishbones
• - Cradle weight 6kg, this is a weight saving of 3.5kg compared to the OEM cradle which weighs 12kg
• - A single and unique mounting position
• - Increased chassis stiffness to improve driving performance
• - No additional bottom bar needed (weight saving)

Characteristics :

• - Better accessibility under the car allowing the triangle to be changed without any other dismantling constraints
• - T45 tubes (BS4T45 to BS4T100) imported from UK and S355 metal sheets
• - All components TIG welded
• - Delivered painted (Epoxy powder coating) black
• - Can be used with OEM wishbones
• - Plug&Play assembly
• - Includes the two supports for the leveling correctors (Xenon headlight)
• - Can be used with OEM wishbones

What's included:

• - Lightweight reinforced cradle painted VERKLINE
• - Supplied with dogbone red polyurethane silentblock

Compatible with :

• Audi A1 Mk2 from 2018
• Audi A3 S3 RS3 8V and 8v2 from 2012
• Audi TT TTS TTRS 8S from 2014
• Audi Q2 from 2017
• Audi Q3 RSQ3 F3 from 2018
• SEAT Leon Mk3 5F from 2006 to 2013
• SEAT Ibiza Mk5 from 2017
• Skoda Octavia Mk3
• Skoda Superb B8
• Volkswagen Golf 7 GTI and R from 2012
• Volkswagen Golf 8 GTI and R from 2012
• Volkswagen Passat 8 from 2015
• Volkswagen Polo Mk6 from 2018

This Kit Replaces:

• – 5Q0199313N
• – 5Q0199315P
• – 5Q0199315R
• – 5Q0199369G
• – 3Q0199369E

Attention 1: If you are using standard OEM metal wishbones and your car is significantly lowered, it may be necessary to shim approximately 2mm of the wishbones over a 10mm length. There is no need to shim anything with OEM aluminum wishbones or when using Verkline front lower control arms.

Attention 2: The cradle does not work with Whiteline and SuperPro front lower control arms. They are wider than the OEM arms and cannot be used with this cradle.

Note: Sold for off-road, race track and racing applications only. Installing these type of parts will cause noise and other vibrations in your vehicle. We strongly advise that you have the crib fitted at a qualified and experienced workshop who will know what to do.

This piece is custom-made to order so when you order this product and we are launching production there will NEVER be taken exchanged refunded, thank you to take NOTE

STR Performance is an official distributor of VERKLINE products, if you are looking for a part from VERKLINE that we do not have on our site, do not hesitate to contact us via our Contact page, so that we can give you a price and a deadline. .