0.205mm injector nose for 1.9L TDI 90hp 110hp engine
The price is for a single nose, please select the quantity required for your engine (4, 5 or 6 injectors)
They are supplied with new copper seal
Data for information (with original pump 10mm):
0.216 - planned for 165hp
0.230 - planned for 175hp
0.240 - planned for 185hp
0.260 - planned for 205hp
0.275 - planned for 220hp
0.341 - intended for 250hp+
An 11mm pump gives you in theory +20hp and a 12mm 50hp (theoretical data depending on your settings, mapping, reprogram etc...)
Injector nozzles from 0.205 to 0.230 remain the right compromise for a vehicle equipped with a 1.9L tdi 90hp or 110hp engine, with turbo and stock engine, almost no smoke with good reprogramming.
For slightly more "hard" reprogramming, we recommend the 0.240mm 0.260mm.
The injector nozzles from 0.275 to 0.300 are for large turbos and pump heads in 11 or even 12mm are mandatory, so heavy preparation.
It is up to you to calibrate them as well as to manage your vehicle in order to use the full power of your new injector nozzles.
They are compatible for:
AUDI
- A3 8L 1.9 TDI - 90hp and 110hp
- A4 B5 1.9 TDI - 90hp and 110hp (all models including Avant)
- A6 C4 / C5 1.9 TDI - 90hp and 110hp (all models including Avant)
- A6 C4 2.5 TDI 140hp (1994-1997)
- A6 C4 2.5 TDI 140hp (1994-1997)
FORD
- Galaxy I 1.9 TDI - 90hp and 110hp
SEAT
- Alhambra I 1.9 TDI - 90hp and 110hp
- Cordoba 6K 1.9 TDI - 90hp and 110hp (all models with Vario)
- Ibiza 6K 1.9 TDI - 90hp and 110hp
- Leon I 1.9 TDI - 90hp and 110hp
- Toledo I / II 1.9 TDI 90hp and 110hp
SKODA
- Octavia I 1.9 TDI - 90hp and 110hp (including estate)
VOLKSWAGEN
- Bora 1.9TDI - 90hp and 110hp (all models including Variant and Syncro)
- Caddy II 1.9TDI - 90hp and 110hp
- Golf III 1.9 TDI - 90hp and 110hp (all models with Variant and Syncro)
- golf iv 1.9 TDI - 90hp and 110hp (all models including Variant and Syncro)
- LT 28/35/46 - 2.5 TDI - 83hp 90hp 95hp 102hp 109hp
- New Beettle 1.9 TDI - 90cv
- Passat B4 / B5 1.9 TDI - 90PS / 110PS (all models with Variant and Syncro)
- Polo 6N 1.9 TDI 90hp and 110hp
- Sharan I 1.9 TDI - 90hp and 110hp
- T4 2.5 TDI - 88hp and 102hp (with 88PS, please note restriction on year of construction)
- T4 2.5 TDI - 151hp
- Vento 1.9 TDI - 90hp 110hp
VOLVO
- 850 2.5 TDI - 140hp (1995-1996)
- S70 2.5 TDI - 140hp (1996-2000)
- S80 2.5 TDI - 140hp (1999-2001)
- V70 2.5 TDI - 140hp (1996-2000)
- For engine codes: ACV / AEL / AFN / AGR / AHD / AHF / AHH / AHU / AHY / ALE / ALH / APA / ANJ / ASV / AUF / AVG / AVR / AYC / AXL / AXX / BBE / BBF / D5252T
restriction: AJT / AYY (88PS variant)
Older injectors have a weaker spray pattern due to wear.
This results in poor combustion.
The renewal of injector nozzles has the following advantages:
- Reduction of soot and scale development
- Reduced fuel consumption
- Better startup behavior
- More engine power
- Longer pistons and valves
- Engine oil is less stressed
Benefit from good quality at particularly affordable prices!
We import our goods ourselves and thus reduce costs for suppliers and intermediaries.
We are happy to pass on this price advantage to you!
