Here are our camshafts from Cat Cams for RENAULT Megane Scénic Laguna 2.0L 8v F3R engine
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for RENAULT Megane Scénic Laguna 2.0L 8v F3R engine
Sports profile :
-
Cat Cams camshaft reference: 5500630/S / Opening 0.1mm, intake 268°, exhaust 268° / Opening 1.0mm, intake 230°, exhaust 230° / Max lift intake 9.65mm, exhaust 9.65mm / Lift at TDC inlet 1.65mm, exhaust 1.65mm / Full opening inlet 110°, exhaust 110°.
Rally and circuit profile:
- Cat Cams camshaft reference: 5500634/S / Opening 0.1mm inlet 291°, exhaust 291° / Opening 1.0mm, inlet 251°, exhaust 251° / Max lift inlet 11.65mm, exhaust 11.65mm / Lift at TDC intake 7.60mm, exhaust 7.60mm / Full opening inlet 108° exhaust 108°. Please note modifications to be planned : external valve springs reference PAC-S99843
The distance between the valve and the piston must be at least 1.0 mm: check 5-15° after TDC on the intake - check 5-15° before TDC on the exhaust machine the pistons if necessary. Improper installation can cause serious engine damage! ONLY for track applications and professional street use with engine management or adjustable carburetors.
- Cat Cams camshaft reference: 5500633/S / Opening 0.1mm inlet 309°, exhaust 309° / Opening 1.0mm, inlet 264°, exhaust 264° / Max lift inlet 11.90mm, exhaust 11.90mm / Lift at TDC intake 3.85mm, exhaust 3.85mm / Full opening intake 106° exhaust 106°. Please note modifications to be planned : external valve springs reference PAC-S99843
The distance between the valve and the piston must be at least 1.0 mm: check 5-15° after TDC on the intake - check 5-15° before TDC on the exhaust machine the pistons if necessary. Improper installation can cause serious engine damage! ONLY for track applications and professional street use with engine management or adjustable carburetors.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
