Here are our camshafts from Cat Cams for RENAULT Megane 1.6L 8v K7M engine
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for RENAULT Megane 1.6L 8v K7M engine
Sports profile :
-
Cat Cams camshaft reference: 5501712/S / Opening 0.1mm, intake 260°, exhaust 260° / Opening 1.0mm, intake 224°, exhaust 224° / Max lift intake 10.20mm, exhaust 10.20mm / Lift at TDC intake 1.35mm, exhaust 1.35mm / Full opening intake 110°, exhaust 110°.
These camshafts are suitable for K7M 1.2-1.4-1.6L engines. However, Renault used different camshaft specifications. Please indicate the following details when ordering: Full engine code / year of manufacture - Camshaft code: Drilled markings in the middle of the camshaft (example: 5+2 points) - Cam base diameter STD + cam height. ECU reprogramming required.
Rally and circuit profile:
- Cat Cams camshaft reference: 5501711/S / Opening 0.1mm inlet 268°, exhaust 268° / Opening 1.0mm, inlet 233°, exhaust 233° / Max lift inlet 10.70mm, exhaust 10.70mm / Lift at TDC intake 6.20mm, exhaust 6.20mm / Full opening inlet 108° exhaust 108°.
These camshafts are suitable for K7M 1.2-1.4-1.6L engines. However, Renault used different camshaft specifications. Please indicate the following details when ordering: Full engine code / year of manufacture - Camshaft code: Drilled markings in the middle of the camshaft - STD cam base diameter + cam height. The distance between the valve and the piston must be at least 1.0 mm: check 5-15° after TDC on intake - check 5-15° before TDC on exhaust. Improper installation can cause serious engine damage. ONLY for track applications and professional street use with engine management or adjustable carburetors.
- Cat Cams camshaft reference: 5501710/S / Opening 0.1mm intake 274°, exhaust 274° / Opening 1.0mm intake 241°, exhaust 241° / Max lift intake 11.15mm, exhaust 11.15mm / Lift at TDC intake 2 .35mm, exhaust 2.90mm / Full opening inlet 110°, exhaust 106°.
These camshafts are suitable for K7M 1.2-1.4-1.6L engines. However, Renault used different camshaft specifications. Please indicate the following details when ordering: Full engine code / year of manufacture - Camshaft code: Drilled markings in the middle of the camshaft - STD cam base diameter + cam height. The distance between the valve and the piston must be at least 1.0 mm: check 5-15° after TDC on intake - check 5-15° before TDC on exhaust. Improper installation can cause serious engine damage. ONLY for track applications and professional street use with engine management or adjustable carburetors.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
