Here are our camshafts from Cat Cams for OPEL 2.0L 16v engine code X20XEV
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for OPEL 2.0L 16v engine code X20XEV
Sports profile :
- Cat Cams camshaft reference: 4602919/C / Opening 0.1mm inlet 267°, exhaust 267° / Opening 1.0mm, inlet 228°, exhaust 228° / Max lift inlet 11.20mm, exhaust 11.20mm / Lift at TDC intake 1.20mm, exhaust 1.20mm / Full opening inlet 112° exhaust 112° Hydraulic Pushers .
Camshafts for use in "ecotec" long block X18XEV-2.0L-2.2L engines. For engines from 2000 with OEM 10.6mm lift. When used on older engines, the distance between the valve seal and retainer must be adjusted.
Rally and circuit profile:
- Cat Cams camshaft reference: 4602921/C / Opening 0.1mm inlet 274°, exhaust 274° / Opening 1.0mm, inlet 236°, exhaust 236° / Max lift inlet 10.95mm, exhaust 10.95mm / Lift at TDC inlet 2.25mm, exhaust 2.20mm / Full opening inlet 108° exhaust 108° Hydraulic Pushers .
Camshafts for use in "ecotec" long block X18XEV-2.0L-2.2L engines. For engines from 2000 with OEM 10.6mm lift. When used on older engines, the distance between the valve seal and retainer must be adjusted. ONLY for track applications and professional street use with engine management or adjustable carburetors - CTOPK02 For use with the standard ECU, use the CTOPK02 Adjustable Cam Pulley Set with Sensor Ring for the OEM sensor sensor on the intake cam pulley.-CTOPK01For stand-alone ECU applications, use the CTOPK01 pulley set without sensor ring.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
