Here are our camshafts from Cat Cams for OPEL 4 cylinders 1.6L 8v engine code OHC
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for OPEL 4 cylinders 1.6L 8v engine code OHC
Sports profile :
Cat Cams camshaft reference: 4600300/C / Opening 0.1mm, intake 265°, exhaust 265° / Opening 1.0mm, intake 221°, exhaust 221° / Max lift intake 11.00mm, exhaust 11.00mm / Lift at TDC intake 0.85mm, exhaust 1.00mm / Full opening intake -2 43°, exhaust 41 -0°.
- Cat Cams camshaft reference: 4600318/C / Opening 0.1mm, intake 276°, exhaust 276° / Opening 1.0mm, intake 227°, exhaust 227° / Max lift intake 10.40mm, exhaust 10.40mm / Lift at TDC inlet 1.00mm, exhaust 1.75mm / Full opening inlet -0 47°, exhaust 39 8°.
Rally and circuit profile:
- Cat Cams camshaft reference: 4600320/C / Opening 0.1mm inlet 287°, exhaust 287° / Opening 1.0mm, inlet 239°, exhaust 239° / Max lift inlet 11.35mm, exhaust 11.35mm / Lift at TDC intake 2.50mm, exhaust 3.05mm / Full opening inlet 15 44° exhaust 40 19°.
- Cat Cams camshaft reference: 4600338/C / Opening 0.1mm intake 287°, exhaust 287° / Opening 1.0mm intake 249°, exhaust 249° / Max lift intake 11.65mm, exhaust 11.65mm / Lift at TDC intake 2 .95mm, exhaust 2.95mm / Full opening inlet 17 52°, exhaust 52 17°.
- Cat Cams camshaft reference 4600339/C / Opening 0.1mm, intake 300°, exhaust 300°/ Opening 1.0mm, intake 261°, exhaust 261°/ Max lift intake 11.70mm, exhaust 11.70mm / Lift at TDC intake 3.85mm, exhaust 3.85mm / Full opening intake 23 58°, exhaust 58 23°.
- Cat Cams camshaft reference 4600444/C Opening 0.1mm intake 311°, exhaust 311° / Opening 1.0mm intake 268°, exhaust 268° / Max lift intake 13.00mm exhaust 13.00mm / Lift at TDC intake 4.85mm, exhaust 4.85mm / Full opening intake 30 58°, exhaust 58 30° Please note modifications to be expected : Valve springs reference PAC-E92009, Pulleys reference CC081.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
