Dynaparts EGR Valve Removal Kit for SAAB 9-3 9-5 1.9 TiD
This kit has been specially designed and developed for SAAB 1.9 TiD engine
This kit includes the electronic box to turn off the lights and prevent your vehicle from being in degraded mode!
No errors on your dashboard, no need to go through the reprogramming box. The kit removes the degraded mode.
This kit is intended for 2 assemblies, namely for 4 or 5 pins flowmeter.
Remember to choose your model with the drop-down banner.
Included the assembly instructions.
Kit designed for 8-valve and 16-valve engine mounting, 1.9 and 2.4 Diesel displacement.
EXAMPLE OF A SAAB EGR VALVE:
- SAAB: 55204250
- SAAB: 55215031
- SAAB: 93181981
SAAB:
- SAAB 9-3 (YS3F) 1.9 TiD (150 HP)
- SAAB 9-3 Cabriolet (YS3F) 1.9 TiD (150 HP)
- SAAB 9-5 (YS3E) 1.9 TiD (150 HP)
- SAAB 9-5 Estate (YS3E) 1.9 TiD (150 HP)
WHY install our kit?
for the reasons given in the description below, and the main cause, avoid engine breakage and clogging.
WHEN and HOW to install our kit?
The EGR valve is a driving element which recycles part of the exhaust gases into the intake. They are burned a second time.
This technique clogs the intake manifold and causes engine problems.
The EGR valve removal kits or plates sold on https://strperformance.com/en/ will allow you to plug, seal and remove EGR valves. You will be able to reduce or eliminate any problem, in a curative and preventive way.
Our products are designed and developed on vehicle valves directly and are attached without significant modification. In order to make your choice or in case of hesitation, compare the photos of our kits with your EGR valve mounted on your vehicle.
