Here are our camshafts from Cat Cams for TOYOTA 1.6L 16v first generation engine code 4A-FE
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for TOYOTA 1.6L 16v first generation engine code 4A-FE:
Sports profile :
Cat Cams camshaft reference: 7105205/S / Opening 0.1mm, intake 268°, exhaust 258° / Opening 1.0mm, intake 222°, exhaust 212° / Max lift intake 8.25mm, exhaust 8.15mm / Lift at TDC intake 8.25 mm, exhaust 8.15mm / Full inlet opening 110°, exhaust 110° / Inlet clearance, 1.40mm, exhaust 0.90mm.
Camshafts for 1st generation 4A-FE engines. Please check the following dimensions before ordering:- Cam base diameter: 28.0mm- Cam follower diameter: 28.0mm- Shim diameter: 25.0mm (between cam and follower).
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
