Here are our camshafts from Cat Cams for CITROEN 4 cylinders 1.3L 8v and PEUGEOT 205 Rallye engine code TU24
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
Camshaft profile available for CITROEN 4 cylinders 1.3L 8v and PEUGEOT 205 Rallye engine code TU24
Sports profile :
-
Cat Cams camshaft reference: 4901105/C / Opening 0.1mm, intake 284°, exhaust 284° / Opening 1.0mm, intake 248°, exhaust 248° / Max lift intake 10.45mm, exhaust 10.45mm / Lift at TDC intake 2.80 mm, exhaust 2.80mm / Full opening inlet 108°, exhaust 108°.
Bearing diameters: 42.42 - 41.82 - 41.23 - 40.62 - 36.92 mm (small bearings) - 8mm valves TU24 engine, 8mm valve stem (205 Rally): springs [réf. PAC-S99843] sur retenues [réf. 99377]b) autres moteurs TU, tige de soupape 7mm : ressorts [réf. PAC-S10011] sur retenues [réf. 99316] ECU reprogramming required.
- Cat Cams camshaft reference: 4901102/C / Opening 0.1mm, intake 269°, exhaust 268° / Opening 1.0mm, intake 234°, exhaust 234° / Max lift intake 10.85mm, exhaust 10.90mm / Lift at TDC intake 1.80 mm, exhaust 1.70mm / Full opening inlet 109°, exhaust 109° Hydraulic pusher .
Bearing diameters: 42.42 - 41.82 - 41.23 - 40.62 - 36.92 mm (small bearings) - 8mm valves TU24 engine, 8mm valve stem (205 Rally): springs [réf. PAC-S99843] sur retenues [réf. 99377]b) autres moteurs TU, tige de soupape 7mm : ressorts [réf. PAC-S10011] sur retenues [réf. 99316] .
Turbo profile:
- Cat Cams camshaft reference: 4901142/C / Opening 0.1mm, intake 270°, exhaust 268° / Opening 1.0mm, intake 235°, exhaust 227° / Max lift intake 10.60mm, exhaust 9.95mm / Lift at TDC intake 2.00 mm, exhaust 0.75mm / Full opening inlet 110°, exhaust 120°.
Bearing diameters: 42.42 - 41.82 - 41.23 - 40.62 - 36.92 mm (small bearings) - 8mm valves.
Rally and circuit profile:
- Cat Cams camshaft reference: 4901137/C / Opening 0.1mm inlet 292°, exhaust 292° / Opening 1.0mm, inlet 249°, exhaust 249° / Max lift inlet 11.05mm, exhaust 11.05mm / Lift at TDC inlet 3.05mm, exhaust 3.05mm / Full opening inlet 108° exhaust 108°.
Bearing diameters: 42.42 - 41.82 - 41.23 - 40.62 - 36.92 mm (small bearings) - 8mm valves. ONLY for track applications and professional street use with engine management or adjustable carburetors. The distance between the valve and the piston must be at least 1.0 mm: - check 5-15° after TDC on intake - check 5-15° before TDC on exhaust. Machine the pistons if necessary. Improper installation can cause serious engine damage.
- Cat Cams camshaft reference: 5502213/C / Opening 0.1mm intake 286°, exhaust 278° / Opening 1.0mm intake 246°, exhaust 238° / Max lift intake 10.65mm, exhaust 10.20mm / Lift at TDC intake 2 .50mm, exhaust 1.95mm / Full opening inlet 110°, exhaust 110° Hydraulic pusher .
- Cat Cams camshaft reference 5502361/C / Opening 0.1mm, intake 282°, exhaust 274° / Opening 1.0mm, intake 244°, exhaust 236° / Max lift intake 11.50mm, exhaust 11.00mm / Lift at TDC intake 2.95mm, exhaust 2.40mm / Full opening opening 108°, exhaust 108° Please note modifications to be expected : Valve springs reference PAC-D92009, Mechanical pushers . CC002 Set: Inlet 0.20mm, exhaust 0.20mm, Cups 99337, Pastilles CC-TRE004
- Cat Cams camshaft reference 5502362/C Opening 0.1mm intake 290°, exhaust 282° / Opening 1.0mm intake 252°, exhaust 244° / Max lift intake 12.00mm exhaust 11.50mm / Lift at TDC intake 3.75mm, exhaust 3.20mm / Full opening inlet 106°, exhaust 106° Please note modifications to be expected : Valve springs reference PAC-D92009, Mechanical pushers reference CC002 Clearance: inlet 0.20mm, exhaust 0.20mm, Cups 99337, Pastilles CC-TRE004
Group N FIA profile:
- Cat Cams camshaft reference 4901101/C / Opening 0.1mm, intake 280°, exhaust 280° / Opening 1.0mm, intake 238°, exhaust 238° / Max lift intake 10.80mm, exhaust 10.80mm / Lift at TDC intake 1.85mm , exhaust 1.85mm / Full opening inlet 107°, exhaust 107°.
Bearing diameters: 42.42 - 41.82 - 41.23 - 40.62 - 36.92 mm (small bearings) - 8mm valves. GN FIA sheet nr. 5366, when ordering, please note whether the camshaft must comply with all approval measures.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
