Here are our camshafts fromCat Cams For RENAULT Clio 16S Williams 1.8L 2.0L 16vengine code F7P F7R
Description :
The camshaft fromCat Cams will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the camshaft Cat Cams, we observe two modifications: the valve lift as well as the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
SOLD IN PAIR
Camshaft profile available for RENAULT Clio Williams 1.8 16v, 2.0engine code F7P F7R
Sports profile :
-
Camshaft Cat CamsReference: 5502225/C / Opening 0.1mm, inlet 260°, exhaust 258° / Opening 1.0mm, inlet 234°, exhaust 230° / Max lift inlet 10.90mm, exhaust 10.65mm / Lift at TDC inlet 1.55mm, exhaust 1.30mm / Full inlet opening 112 °, exhaust 112° Hydraulic pushers.
- Camshaft Cat Cams reference: 5502224/C/ Opening 0.1mm, intake 258°, exhaust 258° / Opening 1.0mm, intake 230°, exhaust 230° / Max lift intake 10.65mm, exhaust 10.65mm / Lift at TDC intake 1.30mm, exhaust 1..30mm / Full opening inlet 112°, exhaust 112° Hydraulic Pusher.
Turbo profile:
- CamshaftCat Cams reference: 5502236/C / Opening 0.1mm, intake 258°, exhaust 268° / Opening 1.0mm, intake 230°, exhaust 220° / Max intake lift 10.65mm, exhaust 9.30mm / Lift at TDC intake 1.55mm, exhaust 0.60mm / Full intake opening 110°, exhaust 115° Hydraulic Pusher.
Rally and circuit profile:
- CamshaftCat Cams reference:5502208/C / Opening 0.1mm inlet 279°, exhaust 271° / Opening 1.0mm, inlet 238°, exhaust 230° / Max lift inlet 10.20mm, exhaust 9.75mm / Lift at TDC inlet 1.75mm, exhaust 1.30mm / Full inlet opening 112 ° exhaust 112°Hydraulic Lifters.
- CamshaftCat Cams reference: 5502213/C / Opening 0.1mm inlet 286°, exhaust 278° / Opening 1.0mm inlet 246°, exhaust 238° / Max lift inlet 10.65mm, exhaust 10.20mm / Lift at TDC intake 2.50mm, exhaust 1.95mm / Full opening inlet 110°, exhaust 110° Hydraulic Pusher.
- CamshaftCat Cams reference 5502361/C / Opening 0.1mm, intake 282°, exhaust 274° / Opening 1.0mm, intake 244°, exhaust 236° / Max lift intake 11.50mm, exhaust 11.00mm / Lift at TDC intake 2.95mm, exhaust 2.40mm / Full opening intake 108°, exhaust 108° Please note changes to be expected :Valve springs reference PAC-D92009,PushersMechanical. CC002 Clearance: Inlet 0.20mm, exhaust 0.20mm,Cups99337, Lozenges CC-TRE004
- CamshaftCat Cams reference 5502362/C Opening 0.1mm inlet 290°, exhaust 282° / Opening 1.0mm inlet 252°, exhaust 244° / Max inlet lift 12.00mm, exhaust 11.50mm / Lift at TDC inlet 3.75mm, exhaust 3.20mm / Full inlet opening 106 °, exhaust 106° Please note changes to be expected : Valve springs reference PAC-D92009, PushersMechanical reference CC002 Clearance: intake 0.20mm, exhaust 0.20mm, Cups99337,Lozenges CC-TRE004
- CamshaftCat Cams reference: 5502363/C / intake 298°, exhaust 290° / Opening 1.0mm, intake 260°, exhaust 252° / Max lift intake 12.50mm, exhaust 12.00mm / Lift at TDC intake 4.55mm, exhaust 4.00mm / Full intake opening 104 °, exhaust 104° Please note changes to be expected : Valve springs reference PAC-D92009, PushersMechanical. CC002 Clearance: intake 0.20mm, exhaust 0.20mm,Cups99337,LozengesCC-TRE004
- Camshaft Cat Cams reference 5502364/C / Opening 0.1mm intake 307°, exhaust 298° / Opening 1.0mm, intake 268°, exhaust 260° / Max lift intake 13.00mm, exhaust 12.50mm / Lift at TDC: intake 5.10mm, exhaust 4.50mm / Full opening inlet 104°, exhaust 104° Please note changes to be expected :Valve springs reference PAC-D92009,PushersMechanical. CC002 Clearance: intake 0.20mm, exhaust 0.20mm,Cups 99337,LozengesCC-TRE004
- CamshaftCat Cams reference 5502301/C / Opening 0.1mm inlet 288°, exhaust 274° / Opening 1.0mm inlet 2580, exhaust 249° / Lift at max intake 12.45mm, exhaust 11.90mm / Lift at TDC intake 3.55mm, exhaust 2.95mm / Full opening inlet 110°, 110° exhaust Please note changes to be expected: Valve springs reference PAC-D92009PushersMechanical. CC002 Clearance: intake 0.10mm, exhaust 0.15mm,Cups99337,LozengesCC-TRE004
- CamshaftCat Cams reference 5502324/C/ Opening 0.1mm: intake 288°, exhaust 287° / Opening 1.0mm intake 262°, exhaust 254° / Max lift intake 12.50mm, exhaust 12.00mm / Lift at TDC intake 4.50mm exhaust 3.95mm full intake opening 106° exhaust 106°. Please note changes to be expected: Valve springs reference PAC-D92009,PushersMechanical CC002 Clearance: intake 0.20mm, exhaust 0.20mm, Cups99337,LozengesCC-TRE004
Group N FIA profile:
- CamshaftCat Cams reference 5502211/C/ Opening 0.1mm, intake 258°, exhaust 267° / Opening 1.0mm, intake 224°, exhaust 230° / Max lift intake 10.00mm, exhaust 9.30mm / Lift at TDC intake 1.20mm, exhaust 1.45mm / Full intake opening 110 °, exhaust 110° Hydraulic Pusher.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
