Intercooler RacingLine VOLKSWAGEN Golf 8 GTI R / A3 S3 8Y / Leon Cupra 4 / TT 45 Ateca Formentor Tarraco 2.0 TSI TFSI Ea888.4
Here is our large volume intercooler from RacingLine for VOLKSWAGEN Golf 8 GTI R / A3 S3 8Y / Leon Cupra 4 / TT 45 Ateca Formentor Tarraco 2.0 TSI TFSI Ea888.4 MQB EVO Gen4
Here is our large volume intercooler from RacingLine forVOLKSWAGEN Golf 8 GTI R / A3 S3 8Y / Leon Cupra 4 / TT 45 Ateca Formentor Tarraco 2.0 TSI TFSI Ea888.4
RacingLine 's MQB 'Evo' intercooler features a body using extra tall internal tubes for maximum boost flow and a massive 96% increase in volume.
Cast iron end boxes ensure minimal turbulence and restriction with internal flow guides to divert airflow up and down throughout the depth of the core, with an enlarged inlet and outlet of 70mm (vs. 60 mm for the original cooler).
These increased 70mm diameter inlet and outlet sizes allow for higher flow rate compared to smaller factory intercoolers. The reinforced silicone hoses provided contribute to this performance. With a multi-layer and woven design, these hoses are designed to resist thermal deformation and bursting pressure. Delivered with Mikalor brand stainless steel clamps.
Development focused on finding the “sweet spot” between maximum IAT cooling and minimum pressure loss. This allowed us to achieve increased size without increased lag.
By constantly reducing Intake Air Temperatures (IAT), heat absorption is minimized, delivering increased performance again and again. No need for the recovery cooling times required for the production intercooler.
An essential upgrade for any 2.0 TSI MQB 'Evo' car.
To accommodate the giant size of the RacingLine Intercooler, slight trimming of the black plastic radiator support is required.
This trim cutout is minimal on popular models such as the Golf mk8, but a larger cutout may be required on some other MQB 'Evo' models.
For reference, the fitment is designed for VW radiator support part number / 5H0 805 588 J
This VWR141000 Intercooler from RacingLine is designed for MQB platforms which are equipped with 2.0 TSI TFSI Ea888.4 engines from 2020
Features and details:
- Plug&Play assembly
- Cooling core 694mmx410mmx56mm (27”x16.14”x2.2”)
- Extensive testing in production vehicles and highly prepared vehicles.
- High quality alloy design
- “High speed core” structure supporting up to 600hp
- High quality matte black finish
- RacingLine LOGO Engraved
- The ideal solution for the most efficient vehicles.
- Kit and assembly instructions included
- Made in UK
Examples of compatible vehicles:
- Volkswagen Golf 8 GTI 2020+
- Volkswagen Golf 8 GTI Clubsport 2020+
- Volkswagen Golf 8 R 2020+
- Volkswagen Arteon R 2.0 TSI 320ps 2020+
- Volkswagen T-Roc R 2.0 TSI EA888.4 2021+
- Volkswagen Tiguan II 2.0 TSI 245ps 2021+
- Volkswagen Tiguan II R 2.0 TSI 320ps 2020+
- Audi S3 8Y 2020+
- Audi A3 2.0 TSI 8Y 2020+
- Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+
- Audi SQ2 (facelift EA888.4) 2021+
- Cupra Leon IV 300 TSI FW 2020+
- Cupra Leon IV 245 TSI FW 2020+
- Cupra Ateca 300ps (EA888.4) 2021+
- Cupra Formentor 310ps 2020+
- Cupra Formentor 245ps 2020+
- SEAT Tarraco 2.0 TSI 245ps 2021+
- Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+
- Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+
- Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+