Lightened reinforced engine front subframe 6Kg VERKLINE For SEAT LEON ALTEA TOLEDO TFSI TSI TDI

Product details:

After a long CAD development based on the 3D scan of the OEM engine cradle, tested with the CAD FEA method (finite element method) and on the road, you can now buy a cradle for the front of your Audi TT TS TTRs 8J cars. List of cars below.

We use the same T45 tubing as in WRC cars, our wishbones provide increased stiffness and extra adjustability. All factory parts are bolted to this unit, no other modifications are necessary.

"T45" tubing is a very unique seamless carbon base steel tubing that has been used in many applications across different industries. It is stronger than the Co-Mo 4130 tube also used in motorsport.

It is widely used in the aerospace industry and in equipment such as pilot seats and crew seats due to the materials ability to withstand high G-forces without cracking or splitting.

This material is carbon and manganese based and conforms to aerospace specifications as defined by British Standards.

This cradle is compatible for LHD (left-hand drive) and RHD (right-hand drive) vehicles.

Properties
Tensile: 700 - 900MPa,
0.2% Yield 620MPa minimum
Hardness test: 201min - 262 max HB or 210min - 275max HV

You must use a new Gen3 steering rack. See image below. The old rack was fitted in some cars before 2008. It is possible to replace the old rack with a new one. Gen3 rack connector requires wiring harness 1K2 971 111 AJ, when installed in a car with a Gen 1 or Gen 2 rack.

Please find three links that you may find useful with the swap: Link 1 , Link 2 and Link 3 .
It is the responsibility of the customer to check if the modification is possible in a workshop where he wishes to install the engine bed before the purchase.

It is better to install the new rack as below

Advantages :

• - Can be used with your OEM wishbones or lowered and adjustable tubular front wishbones
• - Cradle weight 6kg, this is a weight saving of 4kg compared to the OEM cradle which weighs 10kg
• - A single and unique mounting position
• - Increased chassis stiffness to improve driving performance
• - No additional bottom bar needed (weight saving)

Characteristics :

• - Better accessibility under the car allowing the triangle to be changed without any other dismantling constraints
• - T45 tubes (BS4T45 to BS4T100) imported from UK and S355 metal sheets
• - All components TIG welded
• - Delivered painted (Epoxy powder coating) black
• - Can be used with OEM wishbones
• - Plug&Play assembly
• - Includes the two supports for the leveling correctors (Xenon headlight)
• - Can be used with OEM wishbones

What's included:

• - Lightweight reinforced cradle painted VERKLINE
• - Supplied with dogbone black polyurethane silentblock

Compatible with :

• SEAT Altea 5P from 2007 to 2015
• SEAT Toledo Mk3 5P from 2005 to 2009
• SEAT Leon Mk2 1P from 2006 to 2013

This Kit Replaces:

• – 1K0199313AL / 1K0 199 313AL

Note: Sold for off-road, race track and racing applications only. Installing these type of parts will cause noise and other vibrations in your vehicle. We strongly advise that you have the crib fitted at a qualified and experienced workshop who will know what to do.

This piece is custom-made to order so when you order this product and we are launching production there will NEVER be taken exchanged refunded, thank you to take NOTE

STR Performance is an official distributor of VERKLINE products, if you are looking for a part from VERKLINE that we do not have on our site, do not hesitate to contact us via our Contact page, so that we can give you a price and a deadline. .