D2 DRIFT coilover kit for Toyota Corolla AE86

Specifications of D2 Coilovers DRIFT

The new range from D2 called DRIFT , has been specially designed for the practice of drifting. The wide adjustment possibilities of this new generation of threaded assemblies allow you to tune your suspension with high precision, without ever sacrificing the quality of damping including at the level of lowering even the lowest possible: the height regardless of the spring preload, which ensures efficient damping in all circumstances, up to the lowest lowering levels (shock absorber diameter 55 mm).

In order to be able to guarantee better traction, the springs and shock absorbers of the DRIFT range from D2 Racing , they have been specifically designed, studied and optimized to maximize the contact of the tires with the road surface in the most extreme situations (example: at high speed, under strong lateral acceleration, on degraded pavement, etc.). Camber is also adjustable at the front via the shock absorber cup (valid for McPherson type struts only).

D2 Racing coilovers have a single-tube oil design and offer a lowering range of up to 10 to 12 centimeters depending on the model. The damping (also called "hardness") is adjustable in 36 positions. Its shock absorber body is made of aluminum, which provides them with foolproof anti-corrosion protection. In most cases, these aluminum shock absorbers are less heavy than the original, and therefore also save a few precious kilograms, weight being the sinews of war in the race!

Compatible for:

• Toyota Corolla AE86, separate springs at the rear
• Toyota Corolla AE86, rear combination springs

Please let us know the exact model of your vehicle when ordering.

Characteristics and technical information:

• Type of front cups: P
• Type of rear cups: P
• Front spring stiffness: 7.9 kgF / mm
• Rear spring stiffness: 6.2 kgF / mm
• The photo shown for this kit is a generic photo. The actual kit may have design differences depending on your vehicle.

Average delivery times are 5 to 10 working days for mainland France. All D2 products are TÜV and ISO-9001 certified, and benefit from a one-year manufacturer's warranty. To meet specific needs, it is possible to obtain tailor-made springs for all kits. D2 Racing keeps a wide range of spare parts in stock, for the maintenance and repair of your suspensions without delay.

Legend: types of cups

The diagram in photo 2 shows you the difference between the separate springs (identical configuration to the origin), and the combined springs (spring around the shock absorber). The strut must be welded at the front: it is a complex job that must be done with full knowledge and responsibility. STR Performance can perform this installation for you, contact us for more information.

We also specify that your struts must come to us completely disassembled (please remove all the removable parts: springs, flanges, bearings, etc.).
As an example, here is a photo of the struts from a BMW E30 as they should reach us:

We reserve the right to charge a dismantling package if necessary.