Uniball VERKLINE Adjustable front suspension wishbone kit For Audi TT 8N / S3 8L / Golf 4 R32

Product details:

When using your vehicle in sporty driving or on the track, the cornering forces bend the OEM rubber mounts into wishbones which consequently changes the desired geometry of the car.

This can lead to slower track times and inefficient tire use.

It is now possible to easily configure and maintain the desired camber on your track car with our kit from VERKLINE

For this reason, we have developed adjustable front lower arm and wishbones kits that use metal-to-metal uniball and spherical ball joints, similar to high-end vehicles like Porsche RS (GT2RS, GT3RS). Extensively tested on our AUDI TTRS TRACKDAY track vehicle.

Most of the cars used on the track are lower than the factory fitment. Lowering the car has the undesirable effect of moving the chassis lower than the natural position of the ball joint which results in excessive lowering in cases where the wishbone is pointed upward at the end of the wheels.

This means you need more steering lock-up when cornering, the car is slow to respond and not precise.

We use the same T45 tubes as in the WRC cars, our wishbones provide increased stiffness and extra fit. All factory parts are bolted to this unit, no further modification is required.

"T45" tube is a very unique seamless carbon steel tube that has been used in many applications in different industries. It is more resistant than the Co-Mo 4130 tube also used in motorsport.
It is widely used in the aerospace industry and in equipment such as pilot seats and crew seats due to the ability of the materials to withstand high G-forces without cracking or splitting.
This material is carbon and manganese based and meets aerospace specifications set by UK standards.

Properties
Traction: 700 - 900MPa,
0.2% Efficiency 620MPa minimum
Hardness test: 201min - 262 max HB or 210min - 275max HV.

Product features:

• - Adjustment of both uniball ball head play and camber down to -4.5 degrees
• - Lowering
• - No rubber bend, you won't lose the defined geometry when you do your alignment
• - only works with the original cradle

Characteristics :

• - T45 tubes (BS4T45 to BS4T100) imported from UK and S355 metal sheets
• - Proven Uniball M18 ball head (the same type used in our Lancer EVO X kits)

What's included:

• - 1 Set of adjustable triangle Front VERKLINE

Compatible with :

• Audi S3 8L 1.8T 20vt 210cv 225cv
• Audi TT 8N 1.8T 20vt 210cv 225cv
• Volkswagen Golf 4 R32

Note: Sold for off-road, race track and racing applications only. Installing this type of part will cause noise and other vibrations in your vehicle. We strongly advise you to assemble the cradle in a qualified and experienced workshop who will know what to do.

This piece is custom-made to order so when you order this product and we are launching production there will NEVER be taken exchanged refunded, thank you to take NOTE

STR Performance is official distributor of VERKLINE products, if you are looking for a part from VERKLINE that we do not have on our site, do not hesitate to contact us via our Contact page, so that we can give you a price and a deadline .