Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware bearing ACL 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW

Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware ACL bearing 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW

Here is our Ultimate HIGH BOOST Kit planned up to 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNWA only

Pistons diameter
vgm01375
€3,499.95
Last items in stock

 

Do you want an assembly for power up to 1000 HP? We have the solution with our Ultimate HIGH Boost kit!

The most important thing for your engine in one kit. More is not possible.

With this kit you have the perfect combination of forged pistons and our connecting rods for your AUDI 400hp DAZA DNWA only. The high performance pistons come from JE Pistons in Ultra series, the steel connecting rods come from BAR-TEK, they are in titanium nitrided X-Shaft and delivered with ARP connecting rod screws, the connecting rods bearing come from At ACL , we also supply an MLS head gasket and ARP cylinder head screws.


In this kit you will find everything you need. Not only do these pieces work in perfect harmony with each other, but the set also saves you money compared to purchasing each individually.

JE Pistons are extra coated for extreme performance and come with the High Boost piston pin. At the same time, they are still quite light. This combo is of course perfect for motorsports. With the piston comes everything you need for installation: bolts, rings and clips.

Our special connecting rods made of titanium nitrided steel are also extremely light and at the same time very stable. Thanks to their surface area, they can support significant turbo loads without problem. They are milled and cut from a steel block and have an additional bore for better lubrication of the piston pin (Rifle Drilled). They also come with everything you need for assembly: the corresponding ARP 2000 screws and assembly paste.

High performance piston features:

  • Extremely light thanks to a special alloy
  • Reinforced for maximum performance
  • Also for standard bore 82.50mm and if minimal honing is required also in 82.55mm
  • 21mm piston pin
  • For 2.5 TFSI 8v2 only
  • Installation and drilling dimensions are attached

Characteristics of titanium H-shaped connecting rods :

  • high strength milled from a single block of material
  • suitable for extreme power increases of 1000hp
  • extremely light and very stable
  • Magnaflux inspected
  • Pack of 5 per set
  • Dimensions: 144 x 21 mm
  • Weight per connecting rod with screws only approx. 600 grams
  • With oil riser hole for piston pin lubrication (Rifle Drilled)
  • precision bent and tested in our factory
  • WITH ARP 2000 3/8" screw

Characteristics of ACL connecting rod bearing :

  • Racing bearing, ACL Race
  • additional coating
  • additional bore for the piston pin

Characteristics of ARP cylinder head screws:

  • A MUST HAVE for all engines that operate with increased boost pressure!
  • The most important bolts from the global market leader ARP .
  • The studs are made from 8740 Chromoly steel and have rounded threads.
  • Expandable steel up to 40% stronger than stock bolts.
  • All ARP High Performance Bolt Kits include ARP Paste.

Please use plenty of ARP paste!

Characteristics of the MLS COMETIC head gasket:

  • Multi-layer metal head gasket
  • Stock thickness for optimal compression ratio of 9.5:1

We recommend in all cases to reinforce the valve train with our Supertech or Ferrea valve springs and valves.

Suitable for:

  • AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNWA
1 Items
No reviews

7 other products in the same category:

Product return

Product return within 14 days with conditions*

Tracked Delivery

Track your order in real time with Colissimo, UPS FEDEX TNT Chronopost DPD GEODIS

HOTLINE online

Our experts are at your disposal by email or telephone

100% secure payment

Bank card payments via CIC Monetico, COFIDIS or PAYPAL in 4 installments free of charge

FAQ: The Most Frequently Asked Questions
How do I track my package?
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
How to contact Customer Service?
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Which countries do you deliver to?
Toggle Content
What are the shipping times?
Toggle Content
How much are the shipping costs?
Toggle Content