Here are our camshafts from Cat Cams for BMW S14 2.3 L 16v engine code DOHC
Description :
The Cat Cams camshaft will allow you to significantly increase the performance of your vehicle.
When a vehicle needs to receive extensive mechanical preparation to achieve decent results and, above all, a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two changes are observed: the valve lift and the opening angle.
Valve lift allows the opening length and angle to be changed, allowing less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders which increases the power at high revs.
Also, the greater the valve opening angle, the greater the air flow, which promotes the air/fuel mixture and therefore more power.
Therefore, for use in competition, leisure, circuit and other areas, the revs will be more pronounced, the character of your engine will be more aggressive and thus you will benefit from a better range of use which will become a real asset.
Without touching on the subject of driving pleasure which will increase your sensations tenfold.
- Cat Cams camshaft reference: 1300686/S / Opening 0.1mm, intake 277°, exhaust 274° / Opening 1.0mm, intake 243°, exhaust 240° / Max lift intake 12mm, exhaust 11.75mm / Lift at TDC intake 2.95mm, exhaust 2.65mm / Full opening intake 108°, exhaust 108°.
These camshafts can be used in the following engines (different valves are used, please contact Cat Cams if in doubt):- S14 (23 4 EA), 2302 cc, 195 hp- S14 (23 4 S2), 2302 cc, 215 hp- S14 (25 4 S1), 2467 cc, 238 hp. ONLY for use in competition engines with independent engine management (throttle position sensor) or carburettors. evolution of 1300658
ATTENTION /!\
Camshafts are custom-made parts.
Therefore, we will not make any returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and/or contact us.
