CAT CAMS camshaft for BMW 3 Series E36 328i 192hp with vanos intake
CAT CAMS camshaft for BMW 3 Series E36 328i 192hp with vanos intake

CAT CAMS camshaft for BMW 3 Series E36 328i 192hp with vanos intake

Here are our camshafts from Cat Cams for BMW 3 Series E36 328i 12hp with vanos intake

Profile
References
vgm04156
€1,194.95
Made especially for you, available with a lead time of 3 to 6 weeks

 

Here are our camshafts from Cat Cams for BMW 3 Series E36 328i 192hp with vanos intake

SOLD IN PAIR

 

Description :

The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.

When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.

When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.

Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.

You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.

Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.

Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.

Without broaching the subject of driving pleasure which will increase your sensations tenfold.

SOLD IN PAIR

Camshaft profile available for BMW 3 Series E36 328i 192hp with vanos intake

Rally and circuit profile:

  • Cat Cams camshaft reference: 1304213/S /  Opening 0.1mm inlet 257°, ​​exhaust 257° / Opening 1.0mm, inlet 220°, exhaust 220° / Max lift inlet 10.15mm, exhaust 10.15mm / Lift at TDC intake 1.00mm, exhaust 1.55mm / Full opening inlet 110° exhaust 105°.

Billet steel camshafts. The VANOS system (VVT) on the intake camshaft modifies the valve timing: M52 /B20: from 110° to 85° (exhaust: 105° fixed)-M52 /B25: from 110° to 85° ( exhaust: 105° fixed)-M52 /B28: 115° to 90° (exhaust: 105° fixed) Data is displayed for full intake delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! ONLY for track applications and professional street use with engine management or adjustable carburetors.

  • Cat Cams camshaft reference: 1304215/S /  Opening 0.1mm inlet 275°, exhaust 275° / Opening 1.0mm, inlet 237°, exhaust 237° / Max lift inlet 11.15mm, exhaust 11.15mm / Lift at TDC intake 2.05mm, exhaust 2.65mm / Full opening inlet 110° exhaust 105°. Please note modifications to be expected : external valve springs reference PAC-S99843. cups reference 99468/S.

Billet steel camshafts. The VANOS system (VVT) on the intake camshaft modifies the valve timing: M52 /B20: from 110° to 85° (exhaust: 105° fixed) M52 /B25: from 110° to 85° (exhaust : 105° fixed) M52 /B28: 115° to 90° (exhaust: 105° fixed) Data is displayed for full intake delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! VVT reprogramming, operating range adjustment or even elimination of the VVT ​​system should be considered for camshafts with increased service life. FOR COMPETITION REQUESTS ONLY. The following details should be checked: - The camshafts should turn smoothly in the cylinder head, ensuring free stroke by machining where necessary - The distance between the valve seal and the retainer at full lift should be d 'at least 0.6 mm - A minimum valve spring travel of 1.0 mm at full lift must be provided - distance between valve and piston 1.0 mm (pref. 1.5 mm). check 5-15° before TDC on the exhaust, and after TDC on the intake. Before camshaft installation: Please remove the cam brackets and install the new camshafts into the empty cam brackets to check for interference with the cam lobes. Modify the cam mounts if necessary. ONLY for track applications and professional street use with engine management or adjustable carburetors.

/!\ ATTENTION /!\

The camshafts are custom-made parts.

Therefore, we will not carry out returns, exchanges or refunds in the event of an error.

To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.

No reviews

You might also like

Customers who bought this product also bought:

16 other products in the same category:

Viewed products

Customers who bought this product also bought:

Product return

Product return within 14 days with conditions*

Tracked Delivery

Track your order in real time with Colissimo, UPS FEDEX TNT Chronopost DPD GEODIS

HOTLINE online

Our experts are at your disposal by email or telephone

100% secure payment

Bank card payments via CIC Monetico, COFIDIS or PAYPAL in 4 installments free of charge

FAQ: The Most Frequently Asked Questions
How do I track my package?
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
How to contact Customer Service?
I am item content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Which countries do you deliver to?
Toggle Content
What are the shipping times?
Toggle Content
How much are the shipping costs?
Toggle Content