Here are our camshafts from Cat Cams for BMW 6 cylinders 24v 150hp engine code M50
Description :
The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.
When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.
When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.
Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.
You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.
Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.
Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.
Without broaching the subject of driving pleasure which will increase your sensations tenfold.
SOLD IN PAIR
Camshaft profile available for BMW 6 cylinders 24v 150hp engine code M50
Sports profile :
-
Cat Cams camshaft reference: 1303910/C / Opening 0.1mm, intake 250°, exhaust 250° / Opening 1.0mm, intake 213°, exhaust 213° / Max lift intake 9.55mm, exhaust 9.55mm / Lift at TDC intake 1.05 mm, exhaust 1.15mm / Full opening inlet 105°, exhaust 105° Hydraulic tappets.
Billet steel camshafts. The VANOS system (VVT) on the intake camshaft modifies the valve timing: -M50TU /B20: from 105° to 80° (exhaust: fixed 105°) -M50TU /B25: from 110° to 85° (exhaust: 101° fixed) Data is displayed for full intake delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT engaged. Improper installation will result in serious engine damage! ONLY for track applications and professional street use with engine management or adjustable carburetors.
Rally and circuit profile:
- Cat Cams camshaft reference: 1303911/S / Opening 0.1mm inlet 257°, exhaust 257° / Opening 1.0mm, inlet 220°, exhaust 220° / Max lift inlet 10.15mm, exhaust 10.15mm / Lift at TDC inlet 1.60mm, exhaust 1.55mm / Full inlet opening 105° exhaust 105°.
Billet steel camshafts. The VANOS system (VVT) on the intake camshaft modifies the valve timing: -M50TU /B20: from 105° to 80° (exhaust: fixed 105°) -M50TU /B25: from 110° to 85° (exhaust: 101° fixed) Data is displayed for full intake delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT engaged. Improper installation will result in serious engine damage! ONLY for track applications and professional street use with engine management or adjustable carburetors.
/!\ ATTENTION /!\
The camshafts are custom-made parts.
Therefore, we will not carry out returns, exchanges or refunds in the event of an error.
To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.
