CAT CAMS camshaft kit for BMW 6 cylinders 3.2L 24v engine code S54 B32
CAT CAMS camshaft kit for BMW 6 cylinders 3.2L 24v engine code S54 B32

CAT CAMS camshaft kit for BMW 6 cylinders 3.2L 24v engine code S54 B32

Here is our camshaft kit from Cat Cams for BMW 6 cylinders 3.2L 24v engine code S54 B32

Profile
References
vgm13547
€3,959.95
Tax included
Made especially for you, available with a lead time of 3 to 6 weeks

 

Here is our camshaft kit fromCat Cams for BMW 6 cylinders 3.2L 24vengine code S54 B32

Description :

The camshaft fromCat CamsWill allow you to considerably increase the performance of your vehicle.

When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.

When preparing the camshaftCat Cams, we observe two modifications: the valve lift as well as the opening angle.

Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.

You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.

Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.

 

Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.

Without broaching the subject of driving pleasure which will increase your sensations tenfold.

SOLD IN PAIR

The CAT031 KIT includes:

- 24x CAT031 rocker arms

- 2x rocker axles with additional holes (original BMW)

- 1x oil bridge (oil supply from exhaust to intake rocker arm shafts)

Camshaft profile available forBMW 6 cylinders 3.2L 24v engine code S54 B32

Sports profile :

  • CamshaftCat CamsReference:1301804/S / Opening 0.1mm, intake 280°, exhaust 272° / Opening 1.0mm, intake 242°, exhaust 234° / Max lift intake 12.50mm, exhaust 12.25mm / Lift at TDC intake 0.50mm, exhaust 6.05mm / Full intake opening 132 °, exhaust 83°.Please note changes toto expect : pusher reference CAT031.

The VANOS system (VVT) on the intake camshaft reduces the PD from 132° to 72°. Data is displayed for full intake delay (VVT disengaged). The VANOS system (VVT) on the exhaust camshaft changes the PD from 83° to 128°. Data is displayed for full exhaust delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! Reprogramming of the computer recommended.

Turbo profile:

  • CamshaftCat CamsReference:1301809/S/ Opening 0.1mm, inlet 276°, exhaust 260° / Opening 1.0mm, inlet 238°, exhaust 222° / Max lift inlet 12.50mm, exhaust 11.50mm / Lift at TDC inlet 0.45mm, exhaust 5.00mm / Full inlet opening 132 °, exhaust 83°.Please note modifications to be expected:Pusher reference CAT031,

The VANOS system (VVT) on the intake camshaft reduces the PD from 132° to 72°. Data is displayed for full intake delay (VVT disengaged). The VANOS system (VVT) on the exhaust camshaft changes the PD from 83° to 128°. Data is displayed for full exhaust delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! Reprogramming of the computer recommended for TURBO conversion (atmospheric to turbo).

Rally and circuit profile:

  • CamshaftCat CamsReference:1301808/S / Opening 0.1mm inlet 312°, exhaust 304° / Opening 1.0mm, inlet 274°, exhaust 266° / Max lift inlet 14.50mm, exhaust 13.75mm / Lift at TDC inlet 1.75mm, exhaust 1.95mm / Full inlet opening 132° exhaust 83°.Please note changes to be expected: pushers reference CAT031, upper cup reference 99496/s, lower cup reference 99497/O, inner spring reference PAC-E12009, external spring reference PAC-I12009.

The VANOS system (VVT) on the intake camshaft reduces the PD from 132° to 72°. Data is displayed for full intake delay (VVT disengaged). The VANOS system (VVT) on the exhaust camshaft changes the PD from 83° to 128°. Data is displayed for full exhaust delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! Lock or limit the range of the VANOS system For use ONLY in competition engines with independent engine management (throttle position sensor) or carburetors.

  • CamshaftCat CamsReference: 1301807/S / Opening 0.1mm inlet 304°, exhaust 296° / Opening 1.0mm inlet 266°, exhaust 258° / Max lift inlet 13.75mm, exhaust 13.00mm / Lift at TDC inlet 1.30mm, exhaust 7.40mm / Full inlet opening 132°, exhaust 83°.Please note changes to be expected:pushers reference CAT031,upper cupReference 99496/s,lower cupReference 99497/O,inner springReference PAC-E12009,external springReference PAC-I12009.

The VANOS system (VVT) on the intake camshaft reduces the PD from 132° to 72°. Data is displayed for full intake delay (VVT disengaged). The VANOS system (VVT) on the exhaust camshaft changes the PD from 83° to 128°. Data is displayed for full exhaust delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! VVT reprogramming, operating range adjustment or even elimination of the VVT ​​system should be considered for camshafts with increased service life. For use ONLY in competition engines with independent engine management (throttle position sensor) or carburettors.

  • CamshaftCat CamsReference 1301806/S / Opening 0.1mm, intake 296°, exhaust 288° / Opening 1.0mm, intake 258°, exhaust 250° / Max lift intake 13.50mm, exhaust 12.75mm / Lift at TDC intake 0.95mm, exhaust 7.00mm / Full intake opening 132 °, exhaust 83°.Please note changes to be expected:pushers reference CAT031,upper cupReference 99496/s,lower cupReference 99497/O,inner springReference PAC-E12009,external spring reference PAC-I12009.

The VANOS system (VVT) on the intake camshaft reduces the PD from 132° to 72°. Data is displayed for full intake delay (VVT disengaged). The VANOS system (VVT) on the exhaust camshaft changes the PD from 83° to 128°. Data is displayed for full exhaust delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! Standalone ECU based on recommended throttle position sensor. VVT reprogramming, operating range adjustment or even elimination of the VVT ​​system should be considered for camshafts with increased service life.

  • CamshaftCat CamsReference1301805/S / Opening 0.1mm, inlet 288°, exhaust 280° / Opening 1.0mm, inlet 250°, exhaust 242° / Max lift inlet 12.75mm, exhaust 12.50mm / Lift at TDC inlet 0.70mm, exhaust 6.55mm / Full inlet opening 132 °, exhaust 83°. Please note changes to be expected:pushers reference CAT031.

The VANOS system (VVT) on the intake camshaft reduces the PD from 132° to 72°. Data is displayed for full intake delay (VVT disengaged). The VANOS system (VVT) on the exhaust camshaft changes the PD from 83° to 128°. Data is displayed for full exhaust delay (VVT disengaged). Check that the distance between the valves and the piston is at least 1mm with the VVT ​​engaged. Improper installation will result in serious engine damage! ECU reprogramming required.

/!\ ATTENTION /!\

The camshafts are custom-made parts.

Therefore, we will not carry out returns, exchanges or refunds in the event of an error.

To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.

No reviews

You might also like

Internal engine and camshaft assembly grease
Available at the next restocking, lead time of 2 weeks.
Accessories

RedLine reassembly grease for engine and camshaft

CATCAMS
vgm02855
€16.95
Here is our RedLine engine assembly grease, it is ideal for disassembly and reassembly of your engine as well as internals such as camshafts, pulleys and others.
Voir le produit

16 other products in the same category:

CAT CAMS camshaft for BMW M3 E36 engine S50B32
Made especially for you, available with a lead time of 3 to 6 weeks
BMW

CAT CAMS camshaft for BMW M3 E36 engine S50B32

CATCAMS
vgm02869
€1,194.95
Here is our FORGE MOTORSPORT High Flow Dump valve with internal recirculation or external discharge for Volkswagen Polo 6C AW GTI 1.8 TSI 192cv 200cv from 2014
Voir le produit
Camshaft CAT CAMS BMW 2002 282°
Available within 5 to 7 weeks.
BMW

Camshaft CAT CAMS BMW 2002 282°

CATCAMS
vgm05376
€464.95
Here is our Kit of 6 reinforced silicone water cooling hoses from FORGE MOTORSPORT for the engine cooling of your Volkswagen Scirocco 2.0 TFSI with DSG automatic gearbox.
Voir le produit
Product return

Product return within 14 days with conditions*

Tracked Delivery

Track your order in real time with Colissimo, UPS FEDEX TNT Chronopost DPD GEODIS

HOTLINE online

Our experts are at your disposal by email or telephone

100% secure payment

Bank card payments via CIC Monetico, COFIDIS or PAYPAL in 4 installments free of charge

FAQ: The Most Frequently Asked Questions
How do I track my package?
As soon as the shipment is made, you will receive an email with a tracking link. You can also find this link in your customer account, under "My Orders." Delivery is tracked via Chronopost, Colissimo, DPD, or UPS.
How to contact Customer Service?
You can contact our customer service by email at https://strperformance.com/en/ or by phone at +33 01 34 67 70. We are available Monday to Friday, from 9:00 a.m. to 12:00 p.m. and from 2:00 p.m. to 5:00 p.m. Customer service is closed between 12:00 p.m. and 2:00 p.m. Response guaranteed within 24 to 48 hours (excluding weekends and public holidays).
Which countries do you deliver to?
STR Performance ships your orders all over the world: mainland France, French overseas departments and territories, Europe (Belgium, Switzerland, Spain, Germany, etc.) as well as internationally (Canada, Maghreb, overseas, etc.). Our shipping partners include Chronopost, Colissimo, DPD and UPS, depending on the country, weight and size of the package. Shipping costs are automatically calculated at the checkout stage based on your address. Each shipment is tracked online and secure. We deliver to your home, collection point or business depending on the options available in your area.
What are the shipping times?
Shipping times at STR Performance depend on product availability and delivery destination. ✅ Products in stock : dispatch within 24 to 48 working hours after payment validation (excluding weekends and public holidays). 🔄 Products being restocked or personalized : an additional delay may apply (specified on the product sheet or communicated by our customer service). Average delivery times after dispatch : 🇫🇷 Metropolitan France : 1 to 3 working days via Chronopost, Colissimo or DPD 🇪🇺 Europe (Belgium, Luxembourg, Germany, Spain, etc.) : 3 to 7 working days 🌍 DOM-TOM, Canada, Maghreb, and rest of the world : 5 to 12 working days depending on the area Each order benefits from online tracking : you will receive an email with a tracking number as soon as your package is picked up by the carrier. Important : Orders placed after 12 p.m. are generally processed the following business day. Delivery times may be longer during busy periods (sales, promotions, holidays, etc.).
How much are the shipping costs?
Shipping costs are calculated automatically at the checkout stage, based on the weight, volume of your package and your delivery area. We offer several carriers (Chronopost, Colissimo, DPD, UPS) with rates adapted for France, Europe, the French overseas departments and territories and internationally. The exact cost is displayed before payment, once your address has been entered.