Here is our EGR Valve Cooler Delete KIT for BMW 1 Series E81 E82 E87 E88 / 3 Series E90 E91 E92 E93 / 5 Series E61 2.0D 3.0D N47 N47S
This kit has been specially designed and developed for BMW 2.0 and 3.0D diesel engines on N47 and N47S engine with EGR cooler
This part is made of seamless avionics aluminum manufactured IN FRANCE and is perfectly waterproof. It will fit perfectly in place while following the instructions included in this kit.
It will allow you to protect your engine from breakage and fouling.
Over time, your vehicle's EGR system can become clogged with tar and sediment, affecting economy and performance. The BMW EGR Valve Cooler Delete KIT is a direct, easy replacement that solves these problems.
Contents and specifications:
- EGR valve + EGR cooler removal kit (stainless steel, double viton O-rings)
- Exhaust Manifold Blanking Plate with Gasket (Stainless Steel)
- Intake deck plug with gasket (stainless steel)
- screws with washers
- rubber stopper
Made in France!
WHY install our kit?
for the reasons mentioned in the description below, and the main cause, to avoid engine breakage and fouling.
WHEN and HOW to install our kit?
This kit can be installed as soon as you can, especially do not wait. Even a novice in mechanics can do it with tools, you just have to replace your pneumatic EGR valve with this one.
Over time, the EGR valves become clogged and therefore reduce the internal diameter of the air flows, which results in a loss of power and poor gas regeneration.
The EGR valve is an engine element that allows part of the exhaust gases to be recycled into the intake. They are burned a second time.
This technique clogs the intake manifold and causes engine problems.
The EGR valve removal kits or plates sold on https://strperformance.com/en/ will allow you to plug, block and remove the EGR valves. You will thus be able to reduce or eliminate any problem, in a curative and preventive way.
Our products are designed and developed on the vehicle valves directly and are fixed without major modification. In order to make your choice or in case of hesitation, compare the photos of our kits with your EGR valve mounted on your vehicle, or refer to the list of compatible engines below.
This kit fits N47N engines.
Over time, your vehicle's EGR system can become blocked by tar and sediment, affecting economy and performance. The kit is a direct, simple replacement that solves these problems.
Some examples of equipped vehicles:
MINI R56 LCI (05/2009 — 11/2013)
- Cooper D 1.6, 3 doors, N47N
- Cooper D 2.0, 3 doors, N47N
- Cooper SD, 3 doors, N47N
- One D, 3 doors, N47N
MINI Clubman R55 LCI (04/2009 — 06/2014)
- Cooper D 1.6, Clubman, N47N
- Cooper D 2.0, Clubman, N47N
- Cooper SD, Clubman, N47N
- One D, Clubman, N47N
MINI Convertible R57 LCI (05/2009 — 05/2015)
- Cooper D 1.6, Cabrio, N47N
- Cooper D 2.0, Cabrio, N47N
- Cooper SD, Cabrio, N47N
MINI Coupé R58 (12/2010 — 05/2015)
MINI Roadster R59 (01/2011 — 04/2015)
- Cooper SD, Roadster, N47N
MINI Countryman R60 (01/2010 — 10/2016)
- Cooper D 1.6, Countryman, N47N
- Cooper D 2.0, Countryman, N47N
- Cooper D ALL4 1.6, Countryman, N47N
- Cooper D ALL4 2.0, Countryman, N47N
- Cooper SD, Countryman, N47N
- Cooper SD ALL4, Countryman, N47N
- One D, Countryman, N47N
MINI Paceman R61 (03/2012 — 09/2016)
- Cooper D 1.6, Paceman, N47N
- Cooper D 2.0, Paceman, N47N
- Cooper D ALL4 1.6, Paceman, N47N
- Cooper D ALL4 2.0, Paceman, N47N
- Cooper SD, Paceman, N47N
- Cooper SD ALL4, Paceman, N47N
ATTENTION
Once the EGR valve is removed or plugged, your vehicle's ECU will no longer receive a signal from the EGR valve, causing the check engine light or emissions light to appear on your vehicle's dashboard. You can eliminate this problem by reprogramming the EGR bypass on the ECU.
For use off-road and in motorsport.
