Kit Ultimate HIGH BOOST connecting rods forged pistons ARP hardware ACL bearing 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNW
Here is our Ultimate HIGH BOOST Kit planned up to 1000hp for AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNWA only
Do you want an assembly for power up to 1000 HP? We have the solution with our Ultimate HIGH Boost kit!
The most important thing for your engine in one kit. More is not possible.
With this kit you have the perfect combination of forged pistons and our connecting rods for your AUDI 400hp DAZA DNWA only. The high performance pistons come from JE Pistons in Ultra series, the steel connecting rods come from BAR-TEK, they are in titanium nitrided X-Shaft and delivered with ARP connecting rod screws, the connecting rods bearing come from At ACL , we also supply an MLS head gasket and ARP cylinder head screws.
In this kit you will find everything you need. Not only do these pieces work in perfect harmony with each other, but the set also saves you money compared to purchasing each individually.
JE Pistons are extra coated for extreme performance and come with the High Boost piston pin. At the same time, they are still quite light. This combo is of course perfect for motorsports. With the piston comes everything you need for installation: bolts, rings and clips.
Our special connecting rods made of titanium nitrided steel are also extremely light and at the same time very stable. Thanks to their surface area, they can support significant turbo loads without problem. They are milled and cut from a steel block and have an additional bore for better lubrication of the piston pin (Rifle Drilled). They also come with everything you need for assembly: the corresponding ARP 2000 screws and assembly paste.
High performance piston features:
- Extremely light thanks to a special alloy
- Reinforced for maximum performance
- Also for standard bore 82.50mm and if minimal honing is required also in 82.55mm
- 21mm piston pin
- For 2.5 TFSI 8v2 only
- Installation and drilling dimensions are attached
Characteristics of titanium H-shaped connecting rods :
- high strength milled from a single block of material
- suitable for extreme power increases of 1000hp
- extremely light and very stable
- Magnaflux inspected
- Pack of 5 per set
- Dimensions: 144 x 21 mm
- Weight per connecting rod with screws only approx. 600 grams
- With oil riser hole for piston pin lubrication (Rifle Drilled)
- precision bent and tested in our factory
- WITH ARP 2000 3/8" screw
Characteristics of ACL connecting rod bearing :
- Racing bearing, ACL Race
- additional coating
- additional bore for the piston pin
Characteristics of ARP cylinder head screws:
- A MUST HAVE for all engines that operate with increased boost pressure!
- The most important bolts from the global market leader ARP .
- The studs are made from 8740 Chromoly steel and have rounded threads.
- Expandable steel up to 40% stronger than stock bolts.
- All ARP High Performance Bolt Kits include ARP Paste.
Please use plenty of ARP paste!
Characteristics of the MLS COMETIC head gasket:
- Multi-layer metal head gasket
- Stock thickness for optimal compression ratio of 9.5:1
We recommend in all cases to reinforce the valve train with our Supertech or Ferrea valve springs and valves.
Suitable for:
- AUDI RS3 TTRS 2.5 TFSI 400hp DAZA DNWA
Bartek: from Formula 1 training to the leading online shop for tuning parts
BAR-TEK: concrete facts
Founded in 1999
15 years of experience in motor racing
10 years of Formula 1
73 Formula 1 races took part
Advanced training
Bartek was trained at Toyota as an engine technician and supported the Formula 1 team in 73 races and numerous tests at various circuits around the world until 2009. He is fully dedicated to his company BAR-TEK Motorsport since 2010.
Risky situation
Bartek during Jarno Trulli's Formula 1 pit stop in Barcelona in 2005. Despite the fire, Trulli came in second. In 2005, Toyota reached fifth place in the Formula 1 constructors' championship.
Engine mechanic for Ralf Schumacher
Bartek with passion and joy at work. From 2004 responsible for the Formula 1 engine of Ralf Schumacher as an engine mechanic.
Solid training
With his training as an auto mechanic with an emphasis on engines and gear construction, Bartek began his career in auto racing. Even as a little boy, Bartek took vehicles apart and put them back together - in an improved way. After graduating from high school, he needed oil on his fingers again.
One winner - Audi 50 (Polo 1)
1.1 L with Kugelfischer racing fuel injection. With KW L Motorsport, Bartek celebrated the overall victory of the Youngtimer Trophy 98/99.
uwe-reichdURVgvR2eShEEbarteks-erster-polo
Follow the commitment for Uwe Reich
1997 at the Nürburgring Nordschleife. Audi 50 with double carburetor by Weber in the Youngtimer Trophy.
First polo shirt
The first wheelset: the Polo 1 40 with double carburetor from Weber and 129 hp, with a vehicle weight of up to 650 kg!
Everything from a single source - from know-how to installation and from own developments to measure
Before we sell a new product, we first test it in our own vehicles. It is only when the installation is successful and we have tested it on our own 1000 PS dynamometer that it enters our store.
