Product details:
When using the car on the track, it is not possible to set up an appropriate camber with OEM arms. The more stress you put on the arms, the more the OEM rubber mounts on the arm are compressed and therefore you lose what was set very precisely during the alignment of the car.
It is now possible to easily configure and maintain the desired camber on your track car with our kit from VERKLINE
For this reason, we have developed adjustable rear suspension arms that use metal-to-metal uniball and spherical ball joints, similar to high-end vehicles like Porsche RS (GT2RS, GT3RS). Extensively tested on our track.
When correcting your roll center, it is highly recommended that you add spacers of about the same height on the front link to prevent excessive steering at the front. To do this, you need our adjustable shock steering rod ends, which you can find here -> LINK .
Product features:
- Easy adjustment of casters with turnbuckle screw.
- Increased strength and rigidity for improved handling performance.
- No rubber to bend, you won't lose the defined geometry during alignment.
- You don't need to change the whole arm if the ball joint is worn. We use high quality, easily available and replaceable spherical bearings.
- About the same weight as the OEM when it comes to additional features.
Characteristics :
- This is a bolt-on kit, no modification needed to the car.
- Kit delivered pre-assembled, with an initially predefined length.
- Heavy-duty adjusting sleeve and pin machined from high-strength steel.
- CNC machined arm in 6082 t6 aluminum.
- High quality spherical bearings with increased articulation capacity.
- A-arm secured against strong lateral sway which could result in collisions with the rocket or the steering axis.
- Includes all the parts needed to fit on the car.
- Can be used with OEM gear rack and cradle
What's included:
Compatible with :
- - Toyota Supra A90
- - Toyota Supra A91
Note: Sold for off-road, race track and racing applications only. Installing this type of part will cause noise and other vibrations in your vehicle. We strongly advise you to assemble the cradle in a qualified and experienced workshop who will know what to do.
This piece is custom-made to order so when you order this product and we are launching production there will NEVER be taken exchanged refunded, thank you to take NOTE
STR Performance is official distributor of VERKLINE products, if you are looking for a part from VERKLINE that we do not have on our site, do not hesitate to contact us via our Contact page, so that we can give you a price and a deadline .
