CAT CAMS camshaft for CITROEN 4 cylinders 2.0L...
CAT CAMS camshaft for CITROEN 4 cylinders 2.0L 16v engine code XU10J4 (RFY)

CAT CAMS camshaft for CITROEN 4 cylinders 2.0L 16v engine code XU10J4 (RFY)

vgm13434
Made especially for you, available with a lead time of 3 to 6 weeks
€834.95
Tax included

Here are our camshafts from Cat Cams for CITROEN 4 cylinders 2.0L 16v engine code XU10J4 (RFY)

Profil
Références

 Customer ratings and reviews
Nobody has posted a review yet
in this language
 

Here are our camshafts from Cat Cams for CITROEN 4 cylinders 2.0L 16v engine code XU10J4 (RFY)

Description :

The Cat Cams camshaft will allow you to considerably increase the performance of your vehicle.

When a vehicle must receive extensive mechanical preparation to obtain results worthy of the name and above all a significant range of progression, work on the camshafts becomes inevitable.

When preparing the Cat Cams camshaft, two modifications are observed: the valve lift and the opening angle.

Valve lift allows you to change the length and opening angle, which causes less or more air to enter the combustion chamber.

You should know that more air entering therefore modifies the air/fuel mixture in the cylinders, which increases power at high revs.

Also, the greater the opening angle of the valve, the more the air flow increases, which promotes the air/fuel mixture and therefore more power.

Therefore for use in competition, leisure, circuit and other, the revs will be sharper, the character of your engine will be more furious and thus you will benefit from a better range of use which will become a real asset.

Without broaching the subject of driving pleasure which will increase your sensations tenfold.

Camshaft profile available for CITROEN 4 cylinders 2.0L 16v engine code XU10J4 (RFY)

Sports profile :

  • Cat Cams camshaft reference: 4912526/S / Opening 0.1mm, intake 270°, exhaust 257° / Opening 1.0mm, intake 236°, exhaust 226° / Max lift intake 10.75mm, exhaust 10.25mm / Lift at TDC intake 1.70 mm, exhaust 1.10mm / Full opening inlet 112°, exhaust 112° Hydraulic tappets.

The exhaust camshafts have a sleeve and internal oil supply to fit the servo pump (direct drive). The original green colored springs accept a maximum valve lift of 10.8mm.

Turbo profile:

  • Cat Cams camshaft reference: 4913564/S / Opening 0.1mm, intake 272°, exhaust 256° / Opening 1.0mm, intake 236°, exhaust 220° / Max lift intake 11.00mm, exhaust 10.00mm / Lift at TDC intake 2.10 mm, exhaust 0.50mm / Full opening inlet 110°, exhaust 120°. Please note modifications to be expected: pusher reference CC003, pellet reference TS102, upper cup reference 99333, external spring reference PAC-S10011.

The exhaust camshafts have a sleeve and internal oil supply to fit the servo pump (direct drive). FOR COMPETITION REQUESTS ONLY. The following details should be checked: - The camshafts should turn smoothly in the cylinder head, ensuring free stroke by machining where necessary - The distance between the valve seal and the retainer at full lift should be d 'at least 0.6 mm - A minimum valve spring travel of 1.0 mm at full lift must be provided - distance between valve and piston 1.0 mm (pref. 1.5 mm). check 5-15° before TDC on the exhaust, and after TDC on the intake - valve clearances should be adjusted using mechanical caps - please ensure that the lash cap does not touch the valve locks ! Cylinder head machining may be necessary at the camlobes. For use ONLY in competition engines with independent engine management (throttle position sensor) or carburettors.

Rally and circuit profile:

  • Cat Cams camshaft reference: 4912528/S /  Opening 0.1mm inlet 283°, exhaust 278° / Opening 1.0mm, inlet 247°, exhaust 244° / Max lift inlet 11.50mm, exhaust 10.75mm / Lift at TDC inlet 3.00mm, exhaust 2.65mm / Full opening inlet 108° exhaust 108° Hydroelectric pushers. Please note modifications to be expected: upper cup reference 99333 , external spring reference PAC-S10011.

Exhaust camshafts have a sleeve and internal oil supply to fit the servo pump (direct drive)#FOR COMPETITION APPLICATIONS ONLY. The following details should be checked: - The camshafts should turn smoothly in the cylinder head, ensuring free stroke by machining where necessary - The distance between the valve seal and the retainer at full lift should be d 'at least 0.6 mm - A minimum valve spring travel of 1.0 mm at full lift must be provided - distance between valve and piston 1.0 mm (pref. 1.5 mm). check 5-15° before TDC on the exhaust, and after TDC on the intake. ONLY for track applications and for professional street use with engine management or adjustable carburetors, cylinder head machining may be necessary at the camlobes.

  • Cat Cams camshaft reference: 4913553/S / Opening 0.1mm intake 307°, exhaust 298° / Opening 1.0mm intake 268°, exhaust 260° / Max lift intake 13.00mm, exhaust 12.50mm / Lift at TDC intake 4.85mm, exhaust 4.25mm / Full opening intake 106°, exhaust 106°. Please note modifications to be expected: upper cup reference 99333 , external spring reference PAC-S10011, pulley reference CC003, pellet reference TS102.

Exhaust camshafts have a sleeve and internal oil supply to fit the servo pump (direct drive) FOR COMPETITION APPLICATIONS ONLY. The following details should be checked: - The camshafts should turn smoothly in the cylinder head, ensuring free stroke by machining where necessary - The distance between the valve seal and the retainer at full lift should be d 'at least 0.6 mm - A minimum valve spring travel of 1.0 mm at full lift must be provided - distance between valve and piston 1.0 mm (pref. 1.5 mm). check 5-15° before TDC on the exhaust, and after TDC on the intake - valve clearances should be adjusted using mechanical caps - please ensure that the lash cap does not touch the valve locks ! machining of the cylinder head not necessary at the level of the cam lobes. Use ONLY in competition engines with independent engine management (throttle position sensor) or carburetors.

  • Cat Cams camshaft reference 4912527/S / Opening 0.1mm, intake 282°, exhaust 274° / Opening 1.0mm, intake 244°, exhaust 236° / Max lift intake 11.50mm, exhaust 11.00mm / Lift at TDC intake 2.95mm, exhaust 2.40mm / Full opening opening 108°, exhaust 108° Please note modifications to be expected : Valve springs reference PAC-D92009, Mechanical pushers . CC002 Set: Inlet 0.20mm, exhaust 0.20mm, Cups 99337, Pastilles CC-TRE004

/!\ ATTENTION /!\

The camshafts are custom-made parts.

Therefore, we will not carry out returns, exchanges or refunds in the event of an error.

To avoid any inconvenience, please ensure the correct compatibility of the camshafts and or contact us.

High performance camshaft and pulley manufacturer

You might also like

Free Newsletter!

Subscribe to our newsletter to receive our news

Follow us :
Livraison rapide

24 à 48 h
Si produit en stock

RETOUR PRODUIT

POSSIBLE
Sous 14 jours

HOTLINE

EXPERT HOTLINE
à votre écoute

PAIEMENT Sécurisé

Monetico - CIC
Cofidis - Paypal

Product added to compare.