Pipercross MPX1004 Cones Kit for SUZUKI GSX750F Katan A from 1989
Find our Cones Kit from Pipercross MPX1004 for SUZUKI GSX750F Katan A from 1989
Explanations and operation:
PIPERCROSS is the world leader in high-tech polyurethane foam filters.
PIPERCROSS air filters promote 30% more air passage than a paper filter. Each filter is composed of 3 layers of foam of different density, from the largest to the smallest.
The foam frame has a reticular cut cell structure. This structure is produced chemically, then by strictly controlled combustion, offering precision ranging from millimeters to microns.
Why PIPERCROSS filters more efficient?
Thanks to these three layers, PIPERCROSS filters collect coarse impurities outside without clogging the lower layers. Even in a dusty environment such as in a rally race, the foam filters sustainably maintain high performance. This is why 100% of teams use foam filters in Rally Crosscar.
HIGH-TECH PIPERCROSS
PIPERCROSS exclusively offers HIGH PERFORMANCE air filters specific for motorcycles. Everyone knows that some engines in the middle of the motorcycle are fragile from the outset. The use of an oiled filter aggravates this fragility by lubricating the hot wire. Thanks to its mastery of multi-layer variable screen filters, PIPERCROSS is the only manufacturer to offer this technology which preserves the flowmeter and therefore maintains the manufacturer's warranty.
ECOLOGICALLY "FRIENDLY"
PIPERCROSS filters are guaranteed for life and therefore should not be replaced but cleaned. Thanks to their low clogging, PIPERCROSS filters require cleaning much longer than oiled cotton filters. Indeed, maintenance is done every 15,000 km instead of 5,000 for a cotton. Finally, the marked improvement in engine efficiency obtained by better air flow makes it possible to significantly reduce energy consumption.
Technical characteristics :
- Pipercross reference: MPX1004
- Type: Double Cone Filter 60mm X 2
This filter is compatible for:
- SUZUKI GSX750F Katan A from 1989
PIPERCROSS filters promote the passage of air 30% superior to a paper filter.
Each filter is composed of 3 layers of foam of different density, from the largest to the smallest.
The foam frame has a cellular structure with a reticular cut. This structure is produced chemically, then by strictly controlled combustion, offering precision ranging from millimeter to micron.