Pipercross MPX171 molded sports air filter for YAMAHA FZ6R from 2009
Find our molded foam sports air filter from Pipercross MPX171 for YAMAHA FZ6R from 2009
Explanations and operation:
PIPERCROSS is the world leader in High-Tech polyurethane foam filters.
PIPERCROSS air filters promote 30% greater air passage than a paper filter. Each filter is made up of 3 layers of foam of different density, from the largest to the smallest.
The foam frame has a cellular structure with reticular cutting. This structure is produced chemically, then by strictly controlled combustion, offering precision ranging from millimeters to microns.
Why are PIPERCROSS filters more efficient?
Thanks to these three layers, PIPERCROSS filters capture large impurities outdoors without obstructing the lower layers. Even in a dusty environment such as during a rally race, the foam filters maintain high performance over the long term. This is why 100% of teams use foam filters in Crosscar Rallying.
HIGH-TECH PIPERCROSS
PIPERCROSS exclusively offers HIGH PERFORMANCE air filters specific for motorcycles. Everyone knows that some motors in the motorcycle industry are fragile to begin with. Using an oiled filter aggravates this fragility by lubricating the hot wire. Thanks to its mastery of multi-layer filters with variable frame, PIPERCROSS is the only manufacturer to offer this technology which preserves the flow meter and therefore maintains the manufacturer's warranty.
ECOLOGICALLY “FRIENDLY”
PIPERCROSS filters are guaranteed for life and therefore do not need to be replaced but cleaned. Thanks to their low level of clogging, PIPERCROSS filters require much more frequent cleaning than oiled cotton filters. In fact, maintenance is done every 15,000 km instead of 5,000 for a cotton. Finally, the clear improvement in engine efficiency obtained by better air flow makes it possible to very significantly reduce energy consumption.
Technical characteristics :
- Pipercross reference: MPX171
- Type: Molded
- YAMAHA FZ6R from 2009
PIPERCROSS filters promote the passage of air 30% superior to a paper filter.
Each filter is composed of 3 layers of foam of different density, from the largest to the smallest.
The foam frame has a cellular structure with a reticular cut. This structure is produced chemically, then by strictly controlled combustion, offering precision ranging from millimeter to micron.