Lightweight reinforced flywheel 8.2 kg for...
Lightweight reinforced flywheel 8.2 kg for...
Lightweight reinforced flywheel 8.2 kg for Volkswagen Golf 4 5 R32 / A3 8P / TT 8N 8J V6 3.2 240mm 6-speed gearbox
Lightweight reinforced flywheel 8.2 kg for Volkswagen Golf 4 5 R32 / A3 8P / TT 8N 8J V6 3.2 240mm 6-speed gearbox

Lightweight reinforced flywheel 8.2 kg for Volkswagen Golf 4 5 R32 / A3 8P / TT 8N 8J V6 3.2 240mm 6-speed gearbox

vgm07495
In stock
€499.95
Tax included

Here is our 8.2 kg STR Performance lightweight flywheel for Volkswagen Golf 4 5 R32 / A3 8P / TT 8N 8J V6 3.2 240mm 4 wheel drive 6-speed gearbox 02M 240mm

 Customer ratings and reviews
Nobody has posted a review yet
in this language
 

This lightened and reinforced High Performance flywheel from STR Performance , significantly optimizes engine revolutions as well as the distribution of weight between the front and rear of the crankshaft in terms of inertia on Volkswagen Golf 4 5 R32 engines / A3 8P / TT 8N 8J V6 3.2 240mm 4 wheel drive 6-speed gearbox 02M 240mm

Benefits of our lightweight single-mass flywheel:

  • our steering wheel weighs only 8.2 kg, the original steering wheel 12 kg
  • all our flywheels are made of chrome molybdenum steel G 1.75, extremely suitable for high speed engines
  • homologated without limitation of CV
  • significantly improved acceleration due to less flywheel mass
  • the engine revs up faster, no loss of performance.
  • suitable for motorsport and production vehicles
  • less fuel consumption
  • reduces response lag typical of turbo engines
  • precision balancing, bearings are less affected, fine balanced according to DIN ISO 1940
  • including starter crown
  • compatible with both a standard clutch and a high performance clutch
  • made in germany
  • integrated release crown

Here are the assembly instructions:

Preparation :

The friction surface of the flywheel, the threads of the crankshaft, the crankshaft screws (only if these do not have a threadlocker) and the clutch screws must be cleaned of grease, dirt and grease. dust with a cleaner (e.g. brake cleaner), otherwise the clutch may slip after installation.

Screws with thread lock must be used with "medium strength" loctite.

Flywheel screws:

  • Make sure they are screwed tightly into the thread.
  • First tighten by hand then tighten evenly "crosswise" to 116Nm with a torque wrench.
  • (1st pass about 65 Nm - 2nd pass 116 Nm)
  • The friction surfaces (organic and sintered) are equipped with a "spring cage".
  • In order not to impair the operation of the clutch, the friction disc must be fitted with the side of the spring cage facing the flywheel.
  • The friction disc is centered on the flywheel using a centering mandrel (not supplied).
  • Then the pressure plate is pressed onto the flywheel spindles and screwed on.
  • It is important to ensure that the friction disc is centered if no centering mandrel is available for mounting.
  • Screw the pressure plate with the cleaned screws
1 Item

STR Performance

Free Newsletter!

Subscribe to our newsletter to receive our news

Follow us :
Livraison rapide

24 à 48 h
Si produit en stock

RETOUR PRODUIT

POSSIBLE
Sous 14 jours

HOTLINE

EXPERT HOTLINE
à votre écoute

PAIEMENT Sécurisé

Monetico - CIC
Cofidis - Paypal

Product added to compare.